Didnt know wether to put this in garage forum or detailing. Its a bit of both i guess
M18 powered rust removal
Ive had this snap on master extractor kit for about 10 years. Sat in my old damp garage for awhile so it had some surface rust developing. Returning her to her former glory
Its either bad eyesight or poor skills in reading pictures vs reality but everytime i pull up any plug residue identification charts and compare them to the plugs in my hand, i end up with something comparable to listing my symptoms into WebMD. Think i have cancer when i actually just have a...
If $550 is in your budget, you can get a "weld it yourself" kit that fits your trucks year. I got one myself and put it on my 2012 from movebumpers.com and they have a couple styles to choose from but i dont think they carry ranch hand
Im posting here for my durango because over the years ive come to appreciate and trust the level of expertise ive gotten from this forum and ive tried my best to return the favor.
Vehicle:
2019 durango V6 GT AWD, 59,824 miles
I have what i believe to be a "workmanship" factory defect but the...
Autozones system recommended bottom shelf plugs so i told him anything NGK. But after a myriad of different failures i could barely keep up with repairs so i just got rid of it. It was fun to drive but a headache to maintain. 3rd german car, 3rd time ive sold it due to cost of maintenance.
These are from my bmw i recently got. Im having issues with random heavy white smoke from exhaust, intermittent misfire that comes and goes like once a week, oil consumption, might be running hot (i can feel the heat standing anywhere near the car) but i just found out that the coolant temp...
I circled the warning in the last pic because its easily missed if your just flying through it. When the procedure starts, its going to suck in your brake pedal and if your not ready for it you will probably **** your pants like i almost did. It was kinda violent
Also, when its done, it will...
Im going to pass on it. The more i zoom in on all the pics, interior and exterior, i see more and more wear and tear than im willing to deal with. Im already waste deep in a classic project
Yea it would probably be something to tinker on, or whatever, i got my 12 ram and 19 durango that are my dailys.
How was the cummins on the 3rd gens? I see em all over still so i imagine they are decent.
Judging my the cosmetics, interior as well, i dont imagine the previous owner cared to...
Small dealer near me wants $7k for an 04 3500 5.9l i6 turbo 4x4 automatic and It has 292k miles.
I havent seen it in person yet, though there is a big dent on the p/s upper bed area seen in the pics
Besides the damage, is this something you guys would jump on? Diesels are priced insanely high...
The worst part about doing a junk yard part resto is getting to the car first. If you dont have it already, download the "Row 52" app. It searches local yards up to 500 miles away for what vehicle you need.
21 98-01 ram 1500s near me.
Codes?
Since ether didnt do anything, dont worry about fuel.
Since the original problem was no spark, most likely the cap and rotor is what fixed it. Since you changed everything, double verify your firing order. This diagram is for your truck, 2003 5.9. Sometimes people get confused which...
It was just coincidence that this happened right after the radio install. The culprit was my ebay special headlights that have LED tubes. I ran positive from the tubes to M37 ign fuse so they came on with key on. Once i disconnected that my problem disappeared. Still unsure how that could of...
Tracing a seperate issue when i came across this right next to the OBD port.
Exposed wires. Previous owner installed an aftermarket remote start so im not sure if this is part of that setup or not. Basically need to know if i can just cap them or do they belong somewhere
Made a Video
I connected my wire tracer to the signal lamp feed and used my probe near the shifter. Got some feed back. Somehow, something around the shifter is supplying voltage to my turn signal and im not sure where to go from here.
Edit: diagram shows rear lamp and that signal lamp share...
Just pulled codes Codes
U0184: lost comms with radio (as mentioned i installed an aftermarket)
U0164: lost comms with HVAC module. (All hvac controls work just fine)
Its raining currently so im gunna give it a bit before i start checking wires
Edit: i just tried removing the turn signals as...
Basic radio. The PAC harness had wires for nav but i had no use for them so i capped them off and secured them out of the way
It dosent illuminate on the dash, only the exterior light comes on.
Other items of note, my signals are LED with external load resistors that are also soldered and...
2012 1500
Installed new single din, amp, sub. Got everything from cartoys, installed myself. Not first radio rodeo install. Have console shifter. Pac module set to alpine etc.
All terminations were soldered and heat shrinked
Issue: front right indicator illuminates when pressing the brakes...
Actually the whole points system is new to me. Always heard/read about it but just now experiencing it. Its safe to say i didnt retain any of that sweet juicy knowledge when ever it came up. Ill get it though thanks man
Wouldnt that produce back fire though? But yea i went back realizing the mech pump dosnt drive itself. This thing has me scatter brained. I found a method to set timing to near the standard without the engine running. That way i can verify the pump and if its good i can start it up and fine tune...
Honestly, it looks like it has a massive under bite sometimes i like it and others i dont lol sole purpose for getting it was function. She works, she camps, she gets dirty and i was tired of my sport plastic bumper looking like trash.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.