Search results

  1. thade

    Bed and Tailgate Mats

    As others have already stated the bedrug is quite nice, and soft. Usually if someone sees it they comment on how nice it is/looks. About the only thing I haul is groceries, and whatever gets put back there stays in place during the trip home. I didn't have any trouble getting the velcro to...
  2. thade

    Carven 5” exhaust tips

    From what I could tell the big difference is the double walled tips don't come with new clamps like the old style, but other than that they bolted right up nice and tight. Carven sent me a replacement for one that was slightly scratched up, and the replacement set was a bit wonky. On one of the...
  3. thade

    Carven 5” exhaust tips

    I'm running a flowmaster outlaw and it sounds exactly the same with the carvens, but I think they make the truck look better . I also went with the newer double walled style.
  4. thade

    How To: Add Factory Keyless Enter N Go

    Just did a reset and checked to make sure the settings were still enabled, and they are. Still a no go. Trying the battery cable part now. EDIT As is par for the course for me, its often the small things that trip me up. Unhooking the battery for a few minutes fixed it right up. Got a lot of...
  5. thade

    How To: Add Factory Keyless Enter N Go

    Thanks for the help. I didnt even have the wireless section you mentioned, and it boiled down to me having to select a different control unit than the one I was in. I found the setting and enabled it. I see the setting in the radio and its set to on, but the door handles are still dead. I'm lost...
  6. thade

    How To: Add Factory Keyless Enter N Go

    I have a question that hopefully someone far smarter than I am can help me with. A while back I added remote start, keyless entry and go, etc, and all was good in the world. Fast forward to new rims and tires, and I needed to change a few settings for my new tire size and tpms threshold using...
  7. thade

    Can the dreaded hemi tick happen this fast?

    I have a garage kept 2017 model that I bought new and don't drive much. Didn't matter if the engine had been running a day ago, or a week, the lifters would rattle a few seconds on startup and it annoyed the hell out of me. I drained the factory oil out and put RP 5/20 in it. Been silent as...
  8. thade

    Adjustable Upper Control Arms

    I installed Inez hotrods adjustable upper control arms at the same time I did my belltech 2/4. I read a post somewhere here in the forum that recommended adjusting them out 3/8" so I did. At the time I was worried about the same things you seem to be, but the alignment came out perfect, as did...
  9. thade

    Busted an airlift bag/they have awesome customer service

    Yea, they rock. I ordered the wrong kit for my lowered ram on some bad advice. When I emailed them about purchasing new bags separately because I had already cut and ran the lines, they asked for measurements to see what size I needed. As soon as I sent them the info, they shipped me an entirely...
  10. thade

    Belltech 963 nd No rear wobble at any speed !!

    I never experienced any of those things after doing the 2/4 on my 17 standard cab w/ limited slip diff, although I expected to. I ended up doing the rest of it anyway, because I was doing it myself and wanted it done right. I did have an issue initially regarding the height, and the rear...
  11. thade

    Black Quads on Blue Ram’s post em up

    I think they'll look sharp on there, but I'm a bit biased because I think the black housings look better in general.
  12. thade

    Stubby Antenna

    I am that someone. I couldn't care less about the radio, or sattelite version, as I use a usb drive exclusively. I put a 4" or so black aluminum version on my truck a few days after I drove it home from the dealer. I noticed it was picking up stations in my garage when I was swapping head units...
  13. thade

    Question about Air conditioning settings in 18

    I fight with my truck over the a/c and recirculation settings quite often. Drives me crazy.
  14. thade

    Install of oem tow hooks on a 14 Express

    Thank you sir. Much appreciated.
  15. thade

    Morimoto xb vertical fogs installed. Small review

    That's the way I run mine. No issues yet either.
  16. thade

    Install of oem tow hooks on a 14 Express

    Any chance you would share the measurements or pattern, or a pic of what they look like installed from the underside so I can get an idea how they're set up? As to the color, I'm still trying to decide if I want to use some of this brake caliper paint I have on hand, or have a local shop powder...
  17. thade

    Install of oem tow hooks on a 14 Express

    This is exactly what I've been wanting to do, color and all. Would love to get my mitts on a set of those brackets. :(
  18. thade

    New toys!!

    I have an adjustable panhard as well, but it does nothing for the wheels being too far forward, only side to side. But yea, that side offset bothered me too.
  19. thade

    New black quads and Heise LEDs going in...

    That's them iirc. https://www.allmoparparts.com/sku/68270496ad-68270497ae.html
  20. thade

    New toys!!

    I went with both the Inez uca and cut brackets. While I didn't technically "need" the brackets since my truck rode and drove fine, the wheel being off center in the wheel well drove me nuts.
  21. thade

    New black quads and Heise LEDs going in...

    Looks good enough I had to get a set for myself. A nice dark housing, and I get to keep my led upgrades. Thanks for the heads up on the shipping, and thanks to allmoparparts.
  22. thade

    New black quads and Heise LEDs going in...

    Who do you have to kill to get that deal on shipping?
  23. thade

    New black quads and Heise LEDs going in...

    In for the quads....
  24. thade

    Sport Quad (4) Projector Retrofit

    Those look pretty badass.
  25. thade

    Sub Enclosure for Single Cabs

    I bought a couple truck boxes off Amazon and put some low profile 12's in them. Not as fancy as some custom built leather wrapped box, but I'm satisfied with it. Plenty of room back there with the tray removed.

Latest posts

Members online

Total: 1,449 (members: 45, guests: 1,404)
Robots: 1,587

Forum statistics

Threads
195,576
Posts
2,872,040
Members
156,342
Latest member
sellsmr

Share this page

Top