Kicking a dead horse but does anyone have a radio plug wiring diagram for a 2011 2500 ST CC 4x4 5.7L? I'm installing a Pioneer head unit with bluetooth and a backup camera. I have a PAC C2R-CHY4 harness. No steering wheel controls. Speaker wires are connected. I need to know where all of the...
I have a 2011 2500 ST and would like to be able to unlock/lock my doors with a fob. I have AlphaObd and can change the settings to enable the feature. Would I need any modules, wiring harness, etc? Links to write-ups/parts would be much appreciated.
Solid yellow and black/orange chaser come from the dome light down to a connector just behind the cover on driver side. The power wire for the solid yellow is yellow/white chaser. Hope this helps.
It may have something to do with the TIPM. Your fuel pump relay may be going bad. I built one of these cables and it solved my problem.
http://www.verticalvisions.com/
I would start with a compression and leak down test. It will tell you if your issue is top or bottom (pistons or heads). Then, swap #1 and #3 coil. Swap #5 and #3 plugs. Taking all of the suspected ignition components from #3 cylinder. If the code stays at #3, pop the valve cover off and check...
Try this before you start slinging money at it. The guy put together quite the troubleshooting guide for the fuel pump relay attached to the TIPM.
http://www.verticalvisions.com/
I made one of these and it works like a champ. He has many different options but this worked for me.
https://www.verticalvisions.com/tipm-test-bypass-cable-mini-blade-fuses.html
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.