Search results

  1. chazerous

    Any body have issues with strut top mounts

    I have a 13 4wd as well and had the exact same problem less than a year after the bilsteins went in. The passenger side was worse than the drive so I pulled it out and replaced the mount. Driver side is about ready to be replaced now. But mine protruded above the top of the mount, by about an...
  2. chazerous

    Tire sizes making me crazy

    Just plastidiped, I was considering painting them so I dont have to redo them every 6-8 months, but I figure when I get rid of the truck I may have better luck if I take it back to stock. I kept all the other stuff to put back on too, like the grill. Sent from my SM-N960U using Tapatalk
  3. chazerous

    Tire sizes making me crazy

    I've got 285/75/17 tires on my truck, bilsteins at 2.1. Tires are nearly identical in measurements as yours. Seeing as you have a maximum steel ram, this is my max steel all blacked out. I just have stock wheels though, plastidipped black. I will eventually get aftermarket wheel. Sent from my...
  4. chazerous

    How do you install a Rebel grill on a 1500?

    Is it off of an actual rebel, or an aftermarket look-a-like to fit a 4th gen? The actual rebel grill doesn't have the chamfers on the bottom corners, so it may not fit a stock 1500. The rebel has a flat bumper and the gap pieces under the headlights like the 2500 and 3500. Sent from my...
  5. chazerous

    Ethanol Free Gas

    I've tried to find some clear gas as they call it around here. But I haven't found it cheaper than $4.99/Gal. And I cant justify spending the extra $1.45/Gal. If I can find it within a $.30 difference, then I would do it. But until then I'm sticking with the e10. Sent from my SM-N960U using...
  6. chazerous

    2017 5.7 oil

    I get my RL off the shelf locally at a baxters auto. And it's about the best price I can find at 11.49/ quart. Sent from my SM-N960U using Tapatalk
  7. chazerous

    Post up your Maximum Steel Metallic Ram

    My 2013. Didn't go out in search of maximum steel, and I thought it was grey when it was on the lot, but I've grown to love this color. It was completely stock when I got it. I've only seen 2 others in my area. Tons of black, white and silver rams everywhere, it's nice to be a little different...
  8. chazerous

    Lets see what you are towing.

    N-fab epyx. The only down side for me is they attach to the pinch weld with no frame support. That being said, I'm 6'2 350 pounds and they can hold me no problem. I wanted full length with the 2 loop/drop steps and these were what I settled on. They're one of the more affordable options that I...
  9. chazerous

    Lets see what you are towing.

    Gulfstream Kingsport 188rb. Just a little guy. But its our first trailer and all we really need. The wife wanted the trailer so I convinced her I needed a larger truck to tow it, and that's how I got my Ram! Sent from my SM-N960U using Tapatalk
  10. chazerous

    What truck is this?

    Yep. I think if they make it a 4 door it could be successful here in the US. Look at Ford with the explorer and the expidition. Would be about the same difference as the Durango and a ram charger. Sent from my SM-N960U using Tapatalk
  11. chazerous

    What truck is this?

    20 years ago they put a ram charger out in the Mexico market. Might be a similar thing now? Sent from my SM-N960U using Tapatalk
  12. chazerous

    Wild air dam claims

    I know. I was posing the question to the person from my original quote. Sent from my SM-N960U using Tapatalk
  13. chazerous

    Wild air dam claims

    I'm curious why just a lift would drop mpg? If you keep everything else stock, then the mpg shouldn't be affected, right? Unless raising it changes the aerodynamics because the space between the front lip and the ground increases, creating more turbulence, therefore more drag. AND if you look at...
  14. chazerous

    Looking for a Unicorn 4th Gen Sport

    Those crew cabs with the 6'4'' bed are nice. The right dimensions, looks as it should.
  15. chazerous

    Diablo Tuner vs Pedal Commander

    I've had a PC since Christmas time and love it. I picked up a DS i3 last week and put on the 87 tune and disabled MDS. Went to load the stock configuration yesterday so I could go back and change the shift points on the tune. It errored out and bricked my PCM. Called DS this morning and after...
  16. chazerous

    Hemi tick or bad lifer or bad cam

    I have a similar sound. Replaced the passenger side manifold and thought it went away, but it didnt. Now sounds like it's coming from the driver side. Will dig in to that manifold this weekend. Does yours, or any body else's, increase with throttle? Mine will speed up when I push on the gas...
  17. chazerous

    AlfaOBD

    Thank you sir! I'll get one if these hooked up. Sent from my SM-N960U using Tapatalk
  18. chazerous

    AlfaOBD

    I've searched but I'm either using the wrong terms or it hasn't been put out there yet. But is there anyway to make the markers on the mirrors stay on permanently rather than just turn signals? Sent from my SM-N960U using Tapatalk
  19. chazerous

    I want one

    I like this version way more than the haulcat. Reminds of an updated version of the hoonitruck that Ken Block drives. Sent from my SM-N960U using Tapatalk
  20. chazerous

    Cooper AT3 XLT

    I put 285/75r17 discoverer at3 on my 13 CC. I only paid $151 each on Amazon and paid $120 mounted and balanced at a local shop. I squeezed mine on the stock 17x7 rim, so they are a little wide, but they ride great. Only been on for about 3 weeks, but so far I'm very pleased. I have bilsteins set...
  21. chazerous

    Catch can fault

    It was the iat sensor wire you have to remove to take the air intake hose off. It seems to have fixed itself. Went out and started it this morning and it was gone. I think it might just have been disconnecting the sensor that caused the fault. Sent from my SM-G965U using Tapatalk
  22. chazerous

    Catch can fault

    So I installed my oil catch can. First time starting it up I get a check engine light. P0113, intake air temperature circuit high input. I checked the iat sensor and its connected. Anyone else have this issue and know how to resolve it? I put the original line back in to see of that helped, but...
  23. chazerous

    Destroyer Grey

    I like that destroyer color. I would go for it, its unique without being obnoxious. Sent from my SM-G965U using Tapatalk
  24. chazerous

    Painted Door Handles - Maximum Steel Metallic

    I know the paintncode for maximum steel is PAR and as far as I cant tell KAR. It seems most aftermarket items are listed with the KAR code. Sent from my SM-G965U using Tapatalk
  25. chazerous

    First time RAM owner

    I bought my 2013 1500 ST 5.7 hemi almost a month ago and i love it. Ive been reading all the threads soaking up as much info as I can. I thought it was grey on the lot, I took it home and my wife thought it was blue so I ran the paint code and its maximum steel metallic which means we were both...

Latest posts

Members online

... and 14 more.
Total: 972 (members: 64, guests: 908)
Robots: 1,501

Forum statistics

Threads
195,469
Posts
2,870,630
Members
156,181
Latest member
bmaag1962

Share this page

Top