Search results

  1. cityredneck

    Best LED fog lights?

    i'm using rigid sae fog pods (50481) and flood pods (202113) in place of the factory fog lights edited to provide the model numbers and change from sae driving to flood
  2. cityredneck

    Remflex 6022 gasket install question (no heat shield on it like stock gasket)

    when i replaced my factory manifolds with shorty kooks headers (had them ceramic coated) i used the remflex 6022 gasket. got rid of the heat shield. i've had no issues and the trans temp actually went down some (15-30 degrees) if i remember right.
  3. cityredneck

    Bilstein 6112 owners, what setting did you go with?

    i was running 275/60/20s without the lift, no rubbing, no issues. i know the 65s will be a hair bigger, but shouldnt need a lift.
  4. cityredneck

    Bilstein 6112 owners, what setting did you go with?

    i'm at 2.8 setting on the 6112s, zone upper arms, and 3/4 spacer in the rear with 5160s shock. the ride is awesome, so much better than stock. i'm running 275/60/20s bfg ko2. so far i've had no issues with my cv axles up front.
  5. cityredneck

    Power Distribution Box

    if you can provide a pic that might help
  6. cityredneck

    Paid for!

    congrats!
  7. cityredneck

    Rear axle noise after service 2021 Warlock

    at my 30k mile service i also had them replace the rear diff fluid. a few day later i noticed noise from the rear axle. went back to the dealership and one of the techs took a ride and heard the noise, he said that it appears that the limited slip modifier wasnt added when they replaced the diff...
  8. cityredneck

    Soft suspension on a 4x4

    yes, i used a zone upper control arms if i remember correctly. my truck is leveled. if i would do it again, i think i would lift the front 2.1 inches instead of 2.8. but i do have a ranchhand bull nose and hopefully this summer ill be adding a kleinn onboard air/horm setup. so i got a little...
  9. cityredneck

    Soft suspension on a 4x4

    the front 6112s i got came with bilstien springs and i used those. i reused the factory rear coil springs just added a 3/4 inch lift and the 5160s. i did the helwig about a year or two before i did the struts and shocks. oh, i did set the front 6112s to the 2.8 inch lift height. totally...
  10. cityredneck

    Soft suspension on a 4x4

    i did the helwig and used the middle hole. was decent, but when i upgraded to bilstein 6112 front and 5160 rear, still with the helwig set to middle hole and the ride is great, its stiff, but also soft when hitting a big bump/hole. i've got 20" wheel and bfg k02s d-rated i think, i know thyre...
  11. cityredneck

    Magnaflow 18"?

    ive got a 2017 cc 5.7 with a generic magnaflow 18, it does have some drone, but moreso when the mds comes on it sound odd, so now i drive with tow/haul and d+8 turned on all the time
  12. cityredneck

    Need advice on control arms? Pinion Angle

    have you taken it to an alignment shop to get it aligned? would have a better chance of seeing how far out it is and the shop might know how to adjust/correct
  13. cityredneck

    Rough Country Exhaust (96009)

    sorry, i havent. i had a muffler shop install a magnaflo 18 inch muffler inplace of the stock. i love the way it sounds, i cant stay off the go pedal lol
  14. cityredneck

    Truck stuck in park, Red lightning bolt, abs light, 4wd service light. Help!

    ouch, but at least it's fixed
  15. cityredneck

    Yellow LED Fog Lights?

    i'm using rigid sae/dot fog pods and rigid sae/dot driving pods both with yellow lenses over them. the night pick is with them in the factory bumper.
  16. cityredneck

    had my first whoops in the truck

    hit the pole and the gate that opens up. was able to back up and then back of the truck slid into the fence. now that i think of it, ill have to check the dsshcam to see if it caught the action.
  17. cityredneck

    had my first whoops in the truck

    dam ice. was leaving work wednesday and as i went through the gate, once the front tires got over the hump gravity took over. the deicer in the pic is after i got stuck. the deicer worked great and quickly. i shouldve checked it out before trying to leave. made it through the gate that morning...
  18. cityredneck

    Etorque problem

    to me thats crappy, but at the same time the techs arent really getting much money from the tsb's. but it would be nice to have all it all updated.
  19. cityredneck

    Etorque problem

    i figured with that kinda technology that there would be something extra, but dang, thats kinda cool. very cool video that guy made, i'm gonna check out more of his stuff
  20. cityredneck

    Grille Guard vs Push Bar

    i've got the ranch hand summit bullnose bumper. i love it, havent had to use it thankfully, but it seems to be alot sturdier than the oem bumper. https://www.ranchhand.com/searchfilter/?catId=5&catName=5&model=167&year=198
  21. cityredneck

    Good all-weather tires for the Classic

    here is dfw we've only gotten snow like twice in the last couple of years. i've got the bfg k02s and love them. they did just fine in the snow we got, i know they have the 3 mountain peaks on the sidewall which is supposed to be good for snow regions also.
  22. cityredneck

    2017 Ram cruise control problem

    try pushing gear-/gear+ at the same time to see if that helps
  23. cityredneck

    Bilstein 6112/5160 combo

    in mine the ride is just fine, i'm just hoping my cv axles will last awhile. i havent had any issues so far, just thought maybe i shouldn't have got all out lol.
  24. cityredneck

    Bilstein 6112/5160 combo

    i did the same setup last year i think it was. set the fronts to 2.8, if i were to do it again, i'd go one notch down from 2.8. i used a 3/4 inch spacer for the rear coils. the ride is amazing compared to stock!
  25. cityredneck

    Best use of a Ram bed……

    i think that is a pretty nice truck

Latest posts

Members online

... and 14 more.
Total: 1,332 (members: 64, guests: 1,268)
Robots: 1,965

Forum statistics

Threads
195,614
Posts
2,872,583
Members
156,440
Latest member
Curly33

Share this page

Top