Just because I said I would here is the results. So the lever switch is bad. I pulled it out of the column (very simple) and took it apart. The contacts are wore. Cleaned them up and adjusted the little contacts that slide. It worked for a couple of days and then stopped. I noticed the...
I have the 2013 sport trim 2wd quad cab. I have checked all the fuses and relays etc. It is the lever switch. I will pull it and clean the contacts on the board to see if that helps if not I believe I will have to pay out for the new lever switch. I guess sometimes it helps to just put it...
So maybe what my issue is that I'm not getting signal to the high beams when i push the stalk all the way forward which is what/when they should be activated. I just realized by rereading LeesEvox post that I do not have high beams when the switch is pushed all the way to the dash. With that...
@LeesEcox: I have to have the stalk forward and then pull it back toward driver to get the high beams to come on. Then, as i stated they stay on for a matter of 20 sec or so and cut off. I can push the stalk back toward dash all the way and then pull it back toward driver and they will come on...
Anyone had an issue with the highbeams not staying on? My 2013 sport highbeams shut off after about 20 sec. (give or take) I have done some research and thought maybe it was the auto switch, on coming lights etc. I have not been able to find an issue. I went into the settings (on the info...
2013 sport crew cab and I average 14 - 15 round town and on trips get between 18-22 depending on road and weather. very happy with the gas mileage. I have done nothing (yet) to upgrade my truck still stock sport edition.
Im at 79000 on a 13' sport and have not changed yet. Coming up for inspection in May, when i pull the wheels to check I'm sure i will change. but have had no issues and or reason to believe they are worn. Last inspection I pulled tires first and there was plenty of pad left on the stock sets...
Thank you Gregdad,
I wish i had know about this a year ago when i still had a working amber strip on the bottom of my projector light for the passenger side. any ideas or suggestions for replacement that doesnt cost $300 bucks? I guess i could bake it seperate and replace the amber strip then...
It may however the issue is that the amber strip on the bottom of the Projectors has been damaged, I assume from the water. I have no running lights on the passenger side headlight assymbly and this is the only one that has had the moisture issue. so gonna have to buy a new one since it will...
2013 ram sport amber not working on passenger side due to moisture. Anyone have any suggestions. I only need the passenger side, filled with water (i know its a common problem) dried it out several times and did all the things. Now the amber is burned out and even if i bake it and replace I'm...
anyone have any suggestions. I only need the passenger side, filled with water (i know its a common problem) dried it out several times and did all the things. Now the amber is burned out and even if i bake it and replace I'm afraid it will still fill with condensation so would rather just buy...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.