Search results

  1. M

    AlfaOBD

    This is what came up in the google docs with this site as everything needed. My log of my 2014 just shows the "trailer tow present" also and it is marked yes, but mine came with the tow package. All of the codes below with the exception of the "trailer hitch camera" are marked as "yes or...
  2. M

    AlfaOBD

    What all setting have you enabled? Have you enabled the CSM setting? And it is a 2014 truck?
  3. M

    AlfaOBD

    I have a 2014 that came with the backup camera only in the radio. I installed the cargo cam and enabled it with AlfaOBD it worked as it should until the 18.45.xx update. I then lost my cargo cam. I sent it to Infotainment and they reset it the 17.11.xx software and put a patch for the GPS on...
  4. M

    AlfaOBD

    You don't need the security cable with a 2016. Everything else you are correct on. How to save your initial report should be in the first post. The first post should give you all the info you need.
  5. M

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Thanks for that info.
  6. M

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    If you have the heated seats/wheel already can you add just the vented parts?
  7. M

    AlfaOBD

    I have also had this issue. I just leave it running and it loads. Just takes quite a bit of time. Any chance you have a galaxy S9?
  8. M

    Adding back up cam app to 8.4 uaq

    Does the button show up on the 13, 14 and 15's.
  9. M

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    Yes I did write 43 instead of 45. Too many numbers to keep straight. My new radio came back with 18.45.01 and the cargo cam does NOT work. My original radio that they replaced had version 18.13.17 and the cameras worked as they should. I had 17.11.XX and they pushed an ota update and that is...
  10. M

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    I was trying to update to 18.43.01. If you have a cargo cam that is working you do NOT want to update to 18.43.01. You will no long have the cargo cam. I had F/W 18.13.XX and the cargo cam worked as it should. I am in the process of working with Uconnect in an attempt to get it corrected.
  11. M

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    Hoping someone can help me. After some time it was determined that my radio was to be replaced because of the firmware issue I had. The radio was replaced. I have a 2014 VP4. Before all this happened I installed and had working a cargo cam. If you put it in reverse the picture came up and...
  12. M

    ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

    I was having trouble updating my FW. Because of me I bricked it. Can it be sent anywhere to be repaired? What all info do I need to find a replacement? Is there a thread some where that will help me out? Thanks in advance. This was not a firmware brick I caused it. It is not as bricked as...
  13. M

    AlfaOBD

    I'm trying to figure out what you are saying. I have a 14 8.4 that shows both camera inputs on the radio. Yes they are one at a time. When I put it in reverse I can choose with soft buttons to use either one of them. I can also go to controls and select the cargo camera. Software version is...
  14. M

    AlfaOBD

    Have tried that. I can delete and load version 2176 which is the next most recent I have downloaded.
  15. M

    AlfaOBD

    I have and the APK site won't open either. Also 2192 was opening for me.
  16. M

    AlfaOBD

    Anyone having trouble with Alfa 2192 on android not opening up? Mine goes to a white screen and nothing happens.
  17. M

    AlfaOBD

    I do not think that they show up in a 14 on the radio. I have a 14 and the cust set do NOT show up. I was able to set them in alfa. It is under Cusst Prog Feat-CBC AUX "1" power managed. Then choose battery or ignition. And you can also set them for momentary or on/off or I believe remember...
  18. M

    AlfaOBD

    Yes it will work. Did it to my son's 2012.
  19. M

    AlfaOBD

    I don't think the aux switch csm works in the 2014s. You can set them the way you want in alfa but they don't show up on the csm. I have a 14 and could never get them to show up.
  20. M

    AlfaOBD

    The radio was updated because of the GPS unit. The OTA updates are pushed automatically. I don't know if the dealer can do anything or not. I tried a factory reset and that did not work for me. I had no idea what I was going to do to correct it and the over the air update happened and it was...
  21. M

    AlfaOBD

    I had this same issue. What fixed it was the new radio update that came over the air.
  22. M

    AlfaOBD

    My 2014 bighorn came with the trailer hitch or tailgate camera from the factory in the radio.
  23. M

    AlfaOBD

    I believe if it's blue you have power just no signal. So I would check the signal part
  24. M

    AlfaOBD

    Has anyone done the turbo actuator calibration with alfa?
  25. M

    AlfaOBD

    Aimvee, I have programmed some baseline fobs. They are probably different then what you have. These are the ones that I did. Two of them. https://www.ebay.com/itm/Y-170-Chrysler-Dodge-Jeep-Fobik-Key-Replacement-/282953149876?txnId=2028336137018 I had no issues and using the latest version...

Latest posts

Members online

Total: 543 (members: 18, guests: 525)
Robots: 1,237

Forum statistics

Threads
195,437
Posts
2,870,248
Members
156,133
Latest member
NeedHead

Share this page

Top