Sorry been busy
At the time I was more familiar with the Andersen and wanted the grease-lease caps, as the stainless ball ends up greasy and rusty looking in no time. If mine starts to looks bad I polish it back up. With the Andersen you can always get a single ball if your worried about...
I have those lights in black and like mentioned either amazon or ebay will be quite a bit cheaper on price I paid $275 for mine. The white drl has a seperate wire to run to power, I took it to the fuse box with a fuse tap and they work great. I personally prefer them to the stocks because at...
Yep steel ones don't break
Like anything use it within it limits and there should be no problems exceed them regularly and you may find out the hard way.
The Stainless ball is just a regular stainless steel ball set that requires to be greased if you want to curb the squeaking while turning in the coupler. The grease-less ball is an aluminum ball set with Nylon ball caps, no squeak and no grease needed. However the caps wont last forever if...
That's what I have but with a 2.5" shank in my 2500, I actually had the 4" drop when I had a 1500 and just bought the bigger shank and reused the the ball part. I have had it for around 4 years and only had to replace one of the nylon caps. Which was as easy as a call to Andersen giving them...
What psi are your rear tires, you can make quite a difference in ride quality by dropping them. Just use an inflation table and keep your load rating good for normal use
Obviously an upgrade to thuren or carli would be unmatched in ride quality though.
I would assume you can't find reviews cause they haven't had them for long. I bought a torxe bumper which is pretty damn similar. However Rough Country appears to include all the lights. So it really is a good deal.
Pic of the torxe for comparison, was $800 and didn't include any lights
I put a
No wiring behind it and I used a dab of clear silicon, on the threads. No salt on the roads down here so not much of a concern for me.
It's a double wall were they recommend to install it so your not really going through the fire wall
So many people end up buying a vehicle that they just went to look at, I don't know about you but I don't carry both sets of keys with me and frankly wouldn't worry about taking the second back to the dealer if the deal was already done.
I would drop your toe down to zero and try to balance your caster a little better but not worry so much about raising up the drivers side caster angle. A great reference for alignments on these trucks is Thuren Fabrication
https://www.amazon.com/gp/product/B07CWQPWCM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
There's the link to the ones I used, you can find them cheaper just match the specs.
I dont have the part number with me for the radio but Ill be damned, my hub has the two different symbols so it looks like I'll need the different hub.
Hey so I put a UAS into a 2018 2500 Tradesman, however the USB's are not connecting to the head unit. I pulled the radio out and checked the plug to make sure it was installed and it was, and the USB's have power and charge but wont play music or allow carplay.
Anybody else run into this problem.
Thanks for the options was able to tap into the 8,9,10 wires behind the vent and ran them back through the dash into the radio harness. And success so now I'm showing the backup camera on the rearview mirror and the 8.4 radio no more blue screen. Also ran some wires for the cargo cam so I can...
I already have the mic run and works great I believe it's the one from the older 4th gens, and I don't want to give up the the rear view mirror with the image in it. I have lived with the blue screen but would like to just clean it up some by having the radio show the same image.
I was...
I have 2018 Tradesman 2500 I have had a 8.4 hooked up for 6 months or so, I like my rear view camera in the mirror. However I would like to have the 8.4 have the backup camera image too, just so the blue screen isn't there and the wife would appreciate it down there.
Anybody has there's...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.