Add all into the compressor, or should I put 2 in the compressor and 1 1/2 into the accumulator? Sorry, I’ve never worked on the A/C before...
Sent from my iPhone using Tapatalk
I ordered an accumulator, your right, better safe than sorry. Any idea how much pag oil to add when replacing these two components of the system? I know the system holds 6oz total but I don’t know how much is lost in the old components and after the refrigerant is recovered.
Sent from my...
It squeals all the time, whether the clutch is engaged or not... but I already have the compressor so I’ll just swap it and be done with it.
Sent from my iPhone using Tapatalk
My A/C compressor is squealing like a pig and I’m going to swap it out with a new one which I already have. There was no system failure, works perfectly except the bearing squeal. My question is if it’s absolutely necessary to swap the accumulator as well or can I just have the system recovered...
Thanks! It doesn’t spread on the ground as much now that the light bar is in, that slot was open when I took the pic.
Sent from my iPhone using Tapatalk
I added some blue LEDs behind the grill.. it really makes the ram grill look insane!! Also installed a 41” curved light bar into slot in bumper. Super happy with both.
P.S. I know I can’t drive with the grill lights on..
Sent from my iPhone using Tapatalk
I bought some flush mount pods to install in the rear bumper. They came with a wiring harness and a switch. I want to direct wire them so they come on while in reverse. Here’s my question... can I directly attach the power wires to the backup lights AND tap the power wire to the switch so I...
Mine only had 2 wires. I connected them to complete the circuit and still does the same thing, starts and shuts off 5 times in a row. So I’m back to square one... ugh! If I can figure this out I’ll put those wires on a toggle switch so I can kill it if I or someone else is working under the...
I have a similar problem except it starts then shuts off and it does it 5 times, every time. Is there a way to bypass the hood switch to see if that’s the problem? Can I unbolting it and let it hang? Maybe it’s stuck?
I have an 06 itch factory starter.
Sent from my iPhone using Tapatalk
I have an 06 and it turns on with the first position with just the parking lights on. When I got mine, both of those bulbs were blown. Maybe check that? I believe they are 912.
Also, it stays on when the headlights are on as well.
Sent from my iPhone using Tapatalk
is there any way to use LED bulbs in the rear blinker without having to cut wires before the pigtail connector to install resistor? And if I have to splice in resistors, what color wires do I have to splice with the resistor?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.