Search results

  1. G

    Diesel or Gas?

    Duplicate
  2. G

    Diesel or Gas?

    Hello, I have been a diesel guy for many years now. I currently own a 2011 Ram 6.7 3500 with 75K on it. I have no warranty and the truck is flawless except for only one issue. The emissions. If you get a diesel, the emissions leg on the diesel will fail at some point. I only have 75K...
  3. G

    Kansas Diesel Mechanic

    Hello I am looking for a diesel mechanic in the 66053 area. Does anyone know of any who can work on a 2011 Ram 3500
  4. G

    6.4 Hemi No Power high altitude

    Drove across Kansas to Rocky Mountains. Yes loss in power is noticable. However no problems pulling 7600lbs up the mountain. Yes it is slow but I feel safe. 66rfe did not heat up. Same temp. Throughout the adventure. I think this hemi produces when asked and gets the job done.
  5. G

    Done with Ford

    Hello and welcome to the forum. I was that 6.0l guy also. He!! I bought 2 of them. Learned my lesson and went to Ram in 2011. Still have the 2011 and works like a champ. All stock. All highway miles, clean egr every couple years. Chande all filters on schedule. Just keeps working...
  6. G

    Actual Tow Capacity?

    Hello You can get a can very decent payload for the ram 2500. You just can't have the Cummins. With the 6.4L you can get the payload up to 3300 to 3500lbs. I am pulling a TT around 6000lbs any getting 9.5 to 10.5 mpg. Have a 2011 3500 6.7 and get 11.5 to 13.5 mpg however take a small...
  7. G

    Death of the V8 & birth of a.... Inline 6?

    Hello all I know this will be best to death. However you either get longevity (V8) or performance (I6). Ford, GM leArned thier lesson and now Ram will learn it also.
  8. G

    Years to avoid/buy - 2500 for towing

    Hello I will give my .02 cents. I own both worlds in a diesel (all stock) and gas trucks. 2011 3500 longhorn and 2018 2500 6.4l gas. Both have the 3.73s. The 68rfe gets a bad rap due too tuners. Both are all stock on mine and they are pulling machines. I hear many good things on the...
  9. G

    Gas vs. Diesel, 3.73 vs. 4.10, 2500 vs. 3500

    Hello all. I own both the 2
  10. G

    6.7L O2 1/1 & 1/2 sensor mismatch P241A code.

    Hello all, My truck has been throwing the P241A code. I have been investigating the 01 and 02 sensors through AlphaOBD. The voltage runs between 1v and 13.5v and seems to be working. However, on 2 occasions, I saw spikes to above 20,000 on each of the sensors. However, these did not throw the...
  11. G

    Let’s see what you are towing with your 6.4

    Very nice..... Sent from my XP8800 using Tapatalk
  12. G

    6.4 tested on the Ike

    Hello all I have the 6.4l and did the Ike gauntlet a year ago with this truck and had no problems. I used the engine as a break and steady pressure on my brakes. I was pulling 6800 lbs and using the 3.73 gears. I trucked back to Kansas in 97° temps running A/C and truck did not miss a...
  13. G

    Let’s see what you are towing with your 6.4

    Here is what I pull with. The TT loaded is around 6200lbs. I use a WDH pulling and the truck has great power pulling. I get approx. 8 to10 mpg doing 55 to 60 mph on flat land and no head wind. Truck is great and would not hesitate getting another one. Sent from my Moto Z3 Play using Tapatalk
  14. G

    AlfaOBD

    Hello I trying to use the stationary desoot feature on the alphaobd on 2011 Ram Truck. I have met all the criteria and I keep getting conditions not met error. Also in reading the ecu I see desoot feature states no. Is there a way to turn the feature on? I tried resetting the counter and...
  15. G

    2018 RAM Security Module Bypass

    Hello all is the M2Mods building more RAM Security Module Bypass Harnesseses? I see they are out of stock. I am ready to purchase one.
  16. G

    AlfaOBD

    Hello All. I got the alpdobd and MX adapter to program fobik's on a 2018 ram 2500. I keep getting an error the I cannot talk to the ecu after I try programming the fob using the from 225. Do I need the RAM Security Module Bypass Harnesses to program these fobik's?
  17. G

    Transmission debacle-2018

    Hello all I have both the 68RFE and the 66RFE. I just came back from hauling a TT across the Midwest and to the Colorado mountains. I loved the 66RFE going up and down 6% grades. I used the transmission more than the brakes to keep my speed down on the descents and pushed the vehicle hard...
  18. G

    6.4L Hemi Gas milage.

    Hello all Thought I would share my mpg's. Towed 6500lb travel trailer with 2018 Ram 2500 and wdh across Kansas and into Colorado to RMNP. Going across Kansas I ranged 11.7 to 12.5 mpg's. Do 60 mph. Getting into the mountains I got 10.7 to 11.1 mph. I was extremely happy with this. Engine...
  19. G

    Towing gas milage

    Whoever states 16mpg is pulling is not being honest. I have a 2011 dually 3.73 and avg 9-12 mpg. No matter what I pull. The best I got ever was 18.5 on the highway doing 60 mph. The 6.7's are made to work. I also have 2018 2500 6.4 L has and very impressed. I pull anywhere from...
  20. G

    Horse Trailer Towing

    I pulled my first trailer last weekend. 4.5ft Shortwall 3H Aluminum gooseneck Horse trailer I own. Towed it to go and pickup Funiture from a store we frequent. Round trip was 110 miles and the truck did fantastically. I am impressed. First time I towed with gas in 17 yrs. Been a diesel...
  21. G

    Bought a 2018 2500 Hemi

    Glad you have joined the site. I have the same truck and really enjoy it. If you decide to put a gooseneck ball in I installed a B&W in mine. It took about 3 to 4 hours in an afternoon. Pulls great.
  22. G

    What discounts are you seeing on 2018 remaining inventory?

    1. Negotiate on the price. Let them work on the incentives. I was looking for a deal on the lot and went to the all the car dealers on Dec 30th, 2018. I was up front and stated I wanted the deal of the year. In addition, I requested copies of the deal (bid) sheet. If they do not...
  23. G

    Towing w/2500 6.4L

    Research this forum. These is alot of great info on this topic. Well I will give you my 2 cents worth. I just bought 2018 Tradesman with the 6.4L with the 3.73 gears and a 12.5K lb towing and 6'4" Bed 4x4. I also own a 2011 3500 Laramie Longhorn DRW with the 68RFE and 3.73's. However is...
  24. G

    Anyone added the fold flat floor accessory to a quad cab tradesman or express?

    Hello all I have a 2018 Quad cab tradesman and would like to do this mod. Can someone provide the part numbers...

Latest posts

Members online

... and 11 more.
Total: 1,361 (members: 61, guests: 1,300)
Robots: 1,957

Forum statistics

Threads
195,613
Posts
2,872,565
Members
156,437
Latest member
Ryanbuddy1

Share this page

Top