Search results

  1. B

    2012 Ram 1500 switch to power, heated / cooled seats- done!

    well I did just configure the following Car configuration change: Cabin Network: HSM Heated Seat Module: ' NOT SET ' -> '1' and did get the lights to work on the buttons, which was nice I was searching for that bit of info for a bit much appreciated, I did notice that cabin nework HSM heated...
  2. B

    2012 Ram 1500 switch to power, heated / cooled seats- done!

    Just curious if you installed rear heated seats as well, I've added a new body harness on a 2012 crew cab with heated/air seats up front and heated in the rear, made certain all the wiring was plug and play and necessary fuses were in place and enabled on alfaobd however when reviewing previous...
  3. B

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    I've tried to locate any suggestions to my question but no luck so far I have Alpha OBD and have programmed a 2012 2500 to add front cool/heat seats, rear tailgate release, folding mirrors, remote start, and I found selection for rear heated seat to add and once I select start it says it's set...
  4. B

    Flashing Sales Code to BCM

    very well much appreciated
  5. B

    Flashing Sales Code to BCM

    jawzs2 so I went back into alpha obd to configure Car configuration change: Cabin Network: HSM Heated Seat Module: ' NOT SET ' -> '1 ' when I found the option it was just listed didn't say present and I went to select value either Set or Not set I chose Set then turned off the key and removed...
  6. B

    Flashing Sales Code to BCM

    The seats work both heat and air however the buttons do not illuminate to allow for you to know what setting they are (high / low), not a major issue but figure it would be nice to have it function as designed, the steering wheel heat function I have yet to see an option to set that feature. I...
  7. B

    Flashing Sales Code to BCM

    Well if anyone has any suggestions for dealers out West that you've had decent support with respect to adding features feel free to share
  8. B

    Flashing Sales Code to BCM

    The process of making the request through WIC is how I believe the dealer was attempting to add the codes to the BCM, I know it's possible and has been done in the past I just need a dealership that has a good relationship with WIC and maybe I get lucky I guess. The fact that I got folding...
  9. B

    Flashing Sales Code to BCM

    For 2013 model trucks Alpha OBD I believe has a bit more capability. I have used the Alpha OBD to modify a couple things however it's not allowing for heated steering wheel on the App for 2012 models and the pedals don't seem to be enabled with the App either however there is a selection for...
  10. B

    Flashing Sales Code to BCM

    So I have been trying to get a dealership to enable or provide sales codes for heated/air seats/heated steering wheel/adjustable pedals, for the wife. They enabled upgraded folding mirrors in the past (mind you this is for a 2012 2500 which no folding mirror was available on that year of truck)...
  11. B

    Synergy drag link issues

    i had two sets of these installed to help keep the grease in place since they keep everything aligned and not able to flog you can't run the dust boots with these but don't need to steering is solid and good, I also had a small piece of metal spot welded to the adjustment nut and the drag link...
  12. B

    Synergy drag link issues

  13. B

    2012 Rear Park Assit

    Benny, I wanted to know if I could source some parts from you for adding the park assist feature to my 2012 Ram 2500 3C6UD5DL6CG151911 I would add the feature by either going to the dealer to pay for the code or just add through my OBD module which I've used for other bits. I started this...
  14. B

    AlfaOBD

    Canadian Mopar, thx for the link appreciate it I believe it should work as I am adding power folding mirrors and I just need to enable the function and not be concerned with a sales code related to that feature when adding
  15. B

    AlfaOBD

    I am about to order the alphaOBD for my 2012 2500 Cummins as I believe there is no issues with connectivity for pre-2013 model trucks however I was trying to determine if the sales code lists that I've seen are the same in that would the codes be the same for a 2012 model 2500 Ram as say a 2014...

Latest posts

Staff online

Members online

... and 12 more.
Total: 1,388 (members: 62, guests: 1,326)
Robots: 2,062

Forum statistics

Threads
195,611
Posts
2,872,522
Members
156,431
Latest member
5ccarter3

Share this page

Top