Search results

  1. RTnoob

    I have 2017 ram rt alpine system aftermarket amp and subs

    Ya, works fine, sounds good and I've never had a problem. I had a shop do it for me, I didn't feel like fking with it. But ya, just tap into the speaker wires going to the door speaker. It has to be a door speaker, they are the only ones putting bass out.
  2. RTnoob

    Where is the factory amp in a 2017 single cab with alpine

    There's no sub in the R/T, the bass comes from the 6x9s in the doors. To add a amp (for sub) pull a signal from a door speaker (just tap into the speaker wires) and run them to a LOC. "A line output converter, or LOC for short, converts a speaker-level output signal into an RCA preamp-level...
  3. RTnoob

    I have 2017 ram rt alpine system aftermarket amp and subs

    I pulled a signal from the driver's door speaker. All the other speakers are crossed over for mids, highs. Then I used a LOC...
  4. RTnoob

    Kicker 3.5" 44KSC3504 single speaker with wiring harness and bass blocker

    Theres no need for them with the Alpine system though. All the speakers have set crossover points from the amp.
  5. RTnoob

    Kicker 3.5" 44KSC3504 single speaker with wiring harness and bass blocker

    You shouldn't need bass blockers with the Alpine system.
  6. RTnoob

    Complete sound system

    Here's a 12" that only needs .5 cubic ft sealed. I got the mk 4, the older one and it sounds good. Had Cherryman build me a box. https://www.cherrymancustoms.com/ https://stereointegrity.com/product/bm-mk-v-12-subwoofer/
  7. RTnoob

    Rear control arms

    1.25 inch
  8. RTnoob

    Rear control arms

    I thought about getting Core control arms, still might. My Spohns are collecting dust, might be time to move them to the trash. I don't think to many people have the Cores.
  9. RTnoob

    Rear control arms

    My Spohn panhard, lol The other is a Core.
  10. RTnoob

    Rear control arms

    Stick with Core, fk Spohn
  11. RTnoob

    Core 4x4 Panhard Bar

    Belltech makes one
  12. RTnoob

    5 spd to 6spd

    I think the 6 speed and the 5 speed are the same trans, just programed different.
  13. RTnoob

    Lowered 16 RAM

    Lol, sounds like what I was going through. I ended up replacing everything, springs, shocks, panhard and control arms. I think it was the front springs that were causing me problems.
  14. RTnoob

    Crew Cab vs Quad Cab drop

    Looks like they use the same kits 963. I bought the 964hkp kit and every site has it listed different. I'm still trying to get the instructions for the shocks.
  15. RTnoob

    Belltech 963 nd No rear wobble at any speed !!

    Better knock on wood.
  16. RTnoob

    5/7 Drop

    That Core knock off might be better than a Spohn.
  17. RTnoob

    5/7 Drop

    I got a Belltech 964hkp kit, it's 2x4 but Im running GF 2" rears. 2x4 is a little to low for me, I tow a lot and don't like the sag. I drive "kinda" hard, it broke, so I upgraded
  18. RTnoob

    5/7 Drop

    I'd pass on Spohn
  19. RTnoob

    Bell Tech 2/4 963nd kit

    Thx, 1 1/4 in
  20. RTnoob

    Bell Tech 2/4 963nd kit

    Sry, I haven't had the Spohn on in a while. So it's hard to say, I just know the Core panhard isn't going to break on me. If you have a spohn already i wouldn't worry about it but if your looking to get one I'd get the Core, or if you drive hard. I should have taken a pic of them side by side...
  21. RTnoob

    Bell Tech 2/4 963nd kit

    Looks good
  22. RTnoob

    Bell Tech 2/4 963nd kit

    Orange Core4x4 panhard, tier 4 Now I gotta save up for the control arms.
  23. RTnoob

    Bell Tech 2/4 963nd kit

    I got it on already, if ya got the money get it.
  24. RTnoob

    Crew Cab vs Quad Cab drop

    GF has them listed as the same. What kit are you looking at?
  25. RTnoob

    Bell Tech 2/4 963nd kit

    I drive it like I stole it. They said it was the only one to ever break. I never mailed it to them to get fixed, fk that. They should have mailed me a new one. Oh, it's no fun having your panhard bar break. Got a Moog on it now, new Core4x4 panhard should be in Wednesday.

Latest posts

Members online

Total: 998 (members: 44, guests: 954)
Robots: 1,369

Forum statistics

Threads
195,437
Posts
2,870,241
Members
156,132
Latest member
HK2020

Share this page

Top