Search results

  1. O

    Broken front abs wire, C codes?

    I have several chasis codes and a broken abs wire(front passenger) can this be the cause of them? Including an open loop Sent from my SM-G975U using Tapatalk
  2. O

    Just cranks forever without starting...

    It was fuel pump for me. Better be prepared for the lockring tabs on gas tank to break when taking lock ring off(making the tank unusable unless you put bolts and washers through it) used salvage tanks are usually just as bad. A new tank is 900$ So oil the lockring and tabs super good with 3 in...
  3. O

    Slight engine noise. 04 5.7 hemi.

    It sounds like it but no, put your head by passenger wheel well and you will see thats its manifold passenger side Sent from my SM-G975U using Tapatalk
  4. O

    Issue with battery drain and wiper fuse?

    Solved my problem. That was not my drain. It was fuse 51. Bad horn. 1.27amp draw. Disconnected horn and need a new airbag assembly. Sent from my SM-G975U using Tapatalk
  5. O

    Key Fob Replacement

    I got 2 for 10$ on ebay and programmed myself. If you have 1 working fob- its easy and takes 30 secs. Sent from my SM-G975U using Tapatalk
  6. O

    Best method for extracting broken exhaust manifold studs?

    Besides welding or pulling the motor and putting new heads on? Sent from my SM-G975U using Tapatalk
  7. O

    exhaust manifold gasket.. upgrade?

    What is best method for getting broken bolts out? I dont have a welder. Sent from my SM-G975U using Tapatalk
  8. O

    Slight engine noise. 04 5.7 hemi.

    Hemi tick is manifold broken stud. Sent from my SM-G975U using Tapatalk
  9. O

    exhaust manifold gasket.. upgrade?

    If it is ticking then u have broken studs. If you strip them or they are broken below surface and you extract them wrong, you will need new heads. Not an easy job Sent from my SM-G975U using Tapatalk
  10. O

    LED lightbulbs

    I disagree. That is for HID bulbs. Led will work right if placed correctly. The smaller 2 led(low beam) needs to be facing down and the single large led(bright) needs to be facing directly to the top. Use the adjustment screw. Sent from my SM-G975U using Tapatalk
  11. O

    Where to find a front receiver and snowblade?

    I want to plow my own driveway with my 2004 ram 1500 hemi. Where(besides ebay) can I find a used plow for reasonable? I dont wanna pay 1600 Sent from my SM-G975U using Tapatalk
  12. O

    LED lightbulbs

    Loosen the screw and rotate the bulb. The single light should be on top and two lights on bottom Sent from my SM-G975U using Tapatalk
  13. O

    5.7 Hemi Exhaust

    I got mine and exhaust was broken so having a glasspack put on it. Sent from my SM-G975U using Tapatalk
  14. O

    Issue with battery drain and wiper fuse?

    I bought an 04 ram 1500 CrewCab Hemi. The guy I got it from replaced the rusted out truck bed with a wood one. He claims ever since that there has been a battery drain that quit once he took out the 30amp wiper fuse. I have tried and verified this. I leave the fuse out and it is fine. Other...
  15. O

    How hard to remove a wood bed and put on a regular short bed?

    I was thinking that too if I keep it. Its super well built and good lumber. Should I remove the board by the cab and add another or add on to the one there? Sent from my SM-G975U using Tapatalk
  16. O

    How hard to remove a wood bed and put on a regular short bed?

    Thanks! Sent from my SM-G975U using Tapatalk
  17. O

    How hard to remove a wood bed and put on a regular short bed?

    I got a good deal on an 04 ram 1500 crewcab 4wd hemi 5.7 for 2000$ it runs great. The only thing is-the guy said the bed was shot so he built a real nice flatbed-like wood bed from pressure treated 2×4's with just 2x6's as side walls. It shockingly looks good and this setup does have some...

Latest posts

Staff online

Members online

... and 12 more.
Total: 1,297 (members: 62, guests: 1,235)
Robots: 1,756

Forum statistics

Threads
195,612
Posts
2,872,531
Members
156,431
Latest member
5ccarter3

Share this page

Top