Search results

  1. Brian2081

    Lights in bed wont come on

    Check the wire harness behind the left front wheel well liner. The harness tends to rub and chaf on the left front cab mount.
  2. Brian2081

    Backup camera image has changed?????

    Good Evening to all you Ram Heads, It's been awhile since I was last posted, the 2500 (Bullwinkle) has been running strong with no issues until this morning !!! The reverse average image has shrunk ???, and by that I mean the image used to be full screen (RA3 I think, 5 inch wide screen), now...
  3. Brian2081

    Mopar OEM Mud Flaps

    Hey Ramguy, unfortunately the kick back (offset) mount bracket does not hold up to the weight of the flap or the flexing. The mount brackets used to be made of stainless ( sharp truck still advertises them being made of stainless) but they are now aluminum ( false advertisement ) I am on my...
  4. Brian2081

    Thinking I might need a 2nd catch can.

    I can see that. I am old school, normally change oil at roughly 3-3.5K miles. But as usual life got in the way and I have spent the last 12 weekends deep cleaning and painting the father inlaws house. The suck part is, I gave myself severe tendinitis in the process and now my right arm is 50%...
  5. Brian2081

    Thinking I might need a 2nd catch can.

    UPDATE : well I just had the oil changed at about a 4600 mile interval, drained the catch can for the first time since install, and was shocked at the almost 2 OZ's that came out. Glad it didn't get sucked back into the intake, but not happy about the amount of oil.
  6. Brian2081

    SXM cutting out

    Good Evening All, its been awhile since I have been here. I have just recently developed a slight issue with my SXM, (2016 5 inch screen) it has started to cut out. A.M. F.M. work fine, so I am wondering if maybe I am having an issue with the antenna? Has anybody dealt with this issue ? Thanks...
  7. Brian2081

    Previous Canadian truck.

    Well safe to say the 3-36 warranty is gone, but the body/rust warranty should still be active. They only way to transfer what ever warranty is left, the truck when first registered in Canada must be registered as a fleet vehicle. Thats how I was able to transfer mine. Took 5 min at the dealer...
  8. Brian2081

    Wanting to get some rumble out of a stock exhaust.

    Good evening All, hope the weekend is going good for all. Ok, 2016 2500, 5.7, stock 3 inch in, 3 inch out water heater. Would removing the resonater give it some rumble ? Don't tell me to do a cat back system. Thanks in advance. Brian
  9. Brian2081

    Cargo Light Gasket Experiences/Suggestions

    Change ALL the bulbs to LEDs, after installing the light back into the cab, fill the gap between the cab and light with RTV silicone. I have done this 2 yrs ago and have had no issues.
  10. Brian2081

    Chrome LED Tail light

    When I swapped out my factory tail lights for factory led tail lights, I went to the scrap yard and removed the led plug and 6 inches of wire harness from the truck and cut and soldered and re pinned connector to match my wire harness. Went into BCM and changed all lights to LED configuration...
  11. Brian2081

    Interesting class action lawsuit

    Good Evening All, going to through in a few cents of my opinion. First off mdc, extra screws are a futile attempt, there is nothing behind the light to screw into and that is if you don't actually destroy the light itself while attempting this. Second the cause of the 3rd brake light warping is...
  12. Brian2081

    How to disconnect wire harness connector?

    Sorry forgot to answer your question. I had to spray some lube in between the two halves, after I stuck a small thin standard screw driver to get a small gap started. Grab both ends and start wiggling and pulling.
  13. Brian2081

    How to disconnect wire harness connector?

    You can buy the part of the connector you need from the dealer for under $60. Took me about an hour and half to remove the wheel line, methodical unpin and repin the new connector half.
  14. Brian2081

    RA2 blank screen

    Sorry, forgot to mention it's a 2016 2500.
  15. Brian2081

    RA2 blank screen

    Hello and Good Evening to all the Ram radio aficionados, Started truck this afternoon, mostly sunny, low 70's, not overly hot inside and noticed the radio screen is completely blank. Music is playing but that is all, got home 15 min later, shut down the truck, removed key opened door radio...
  16. Brian2081

    Trailer Backup Light Harness Question

    Check the harness behind the left front wheel liner. The harness runs around the left front cab mount and has a tendency to chafe through a wire or two.
  17. Brian2081

    no trailer lights

    Check for chaffed wire behind the left front wheel liner. The wire harness runs around the left front cab mount and the harness has a tendency to chaff through the wires.
  18. Brian2081

    Larger tire with stock spare tire?

    Hey Socal, yes I do. Factory installed.
  19. Brian2081

    Larger tire with stock spare tire?

    Hi Socal, I have a 35 12.5 18 Falken MT on a factory aluminum rim in my spare location under the truck at 50 psi. Snug fit but fits.
  20. Brian2081

    Need help identifying this tube and its purpose.

    Exactly what I did, brake clean and good to go.
  21. Brian2081

    Thinking I might need a 2nd catch can.

    HOLY HELL, $53.00 for a PCV valve !!!!!!!, I'll just keep cleaning this one. When did these get so pricey????
  22. Brian2081

    Need help identifying this tube and its purpose.

    HOLY HELL, $53.00 for a PCV valve !!!!!!!, I'll just keep cleaning this one. When did these get so pricey????, I remember paying $2 or $3 for the little metal cylinder with a ball bearing inside.
  23. Brian2081

    Thinking I might need a 2nd catch can.

    On the PCV, thanks. Get it cleaned tomorrow along with a engine power wash just for hemi lol.
  24. Brian2081

    Thinking I might need a 2nd catch can.

    Better not be any issues with this engine. Only has 23000 Miles on it.
  25. Brian2081

    No right turn or brake on trailer

    If you are blowing fuses, it sounds like a short to ground. When I bought my 16 2500, went to tow a car trailer and found out I had no running lights on the trailer. At some point before me, somebody had tapped Into the left tail light for running lights. Eventually found that I had a...

Latest posts

Staff online

Members online

... and 23 more.
Total: 1,574 (members: 73, guests: 1,501)
Robots: 1,652

Forum statistics

Threads
195,605
Posts
2,872,450
Members
156,420
Latest member
WVPOWERMAN

Share this page

Top