Search results

  1. Brian2081

    Backup camera image has changed?????

    Good Evening to all you Ram Heads, It's been awhile since I was last posted, the 2500 (Bullwinkle) has been running strong with no issues until this morning !!! The reverse average image has shrunk ???, and by that I mean the image used to be full screen (RA3 I think, 5 inch wide screen), now...
  2. Brian2081

    SXM cutting out

    Good Evening All, its been awhile since I have been here. I have just recently developed a slight issue with my SXM, (2016 5 inch screen) it has started to cut out. A.M. F.M. work fine, so I am wondering if maybe I am having an issue with the antenna? Has anybody dealt with this issue ? Thanks...
  3. Brian2081

    Wanting to get some rumble out of a stock exhaust.

    Good evening All, hope the weekend is going good for all. Ok, 2016 2500, 5.7, stock 3 inch in, 3 inch out water heater. Would removing the resonater give it some rumble ? Don't tell me to do a cat back system. Thanks in advance. Brian
  4. Brian2081

    RA2 blank screen

    Hello and Good Evening to all the Ram radio aficionados, Started truck this afternoon, mostly sunny, low 70's, not overly hot inside and noticed the radio screen is completely blank. Music is playing but that is all, got home 15 min later, shut down the truck, removed key opened door radio...
  5. Brian2081

    Need help identifying this tube and its purpose.

    2016, 5.7, oil is being sucked through this tube into the air box lid and into the air intake tube & TB. One end attaches to a port just below the oil fill cap.
  6. Brian2081

    Thinking I might need a 2nd catch can.

    First mod of the 2022 season, YEA !!!!!. Pulled the top of the air box off and noticed some oil residue in side. Pulled the hose off the TB and eewwww. The breather tube from the oil fill has oil residue inside it. Not sure if I should hook can up to this hose or the hose coming from the back of...
  7. Brian2081

    2011, 5.7, 217,000 miles, P0016

    Good Evening to all the Ram Fans, OK, riddle me this Batman, Boss is driving his truck, stops at light truck dies no warning and won't restart. Check codes, only thing showing is P0016 " Crank and Cam correlation". Finally finds a shop yesterday that would work on it, mechanic checks codes sees...
  8. Brian2081

    Canadian Pacifica vans

    This is a question for our Canadian friends. Do any of you own a Pacifica, if so does it have a block hea
  9. Brian2081

    Windshield side trim...

    Found this this afternoon, both windshield side trim pieces have moved about 1/4 - 3/8 of an inch. Has anybody delt with this issue, if so what am I looking at repair wise ?
  10. Brian2081

    Rear led dome light

    Hello, looking for led rear dome light P/N 156070190, or the bezel in tan. Thanks, Brian
  11. Brian2081

    2500 exhaust thoughts & opinions.

    Good Evening fellow Ram Heads, Ok, my idea is to put a 1500 3 inch single in and 2.5 inch duel out stock muffler on a 2500 cclb. What could be the pros and cons of this ?
  12. Brian2081

    2016 2500 5.7 wiring manual

    To the keeper(s) of the covenant wiring manuals, please grant me access to these books of knowledge. I have a project in mind and require the knowledge.
  13. Brian2081

    5th gen 50 gal fuel tank into a 4th gen.

    Co worker just picked up 5th gen 2500 cclb with 50 gal tank. What are the chances it will fit a 4th gen 2500 cclb ???.
  14. Brian2081

    2021 3.6 eco light.

    Hello all, friend of mine just bought a "21" with the 3.6. The question is what does the "ECO" light mean, and is it disabling any cylinders ? Thanks in advance.
  15. Brian2081

    Your Thoughts on E3 sparkplug

    Hello fellow Hemi Heads, I am thinking about putting E3's in my "16" 5.7. Ran E3's in my old "98" Silverado 5.7, put between 80k & 90k on that set without missing a beat. So I am looking for your thoughts or experience if you have used them in your Hemi. Thanks, Brian
  16. Brian2081

    09 2500 engine swap question

    Hello All, friend of mine we think popped a head gasket, lots of coolant in oil. With the amount of coolant in oil I am thinking she probably tore up some bearings. Question is, can we use a 5.7 from any 4th gen 09 thru 18 ? Thanks, Brian
  17. Brian2081

    Cheap spare tire carrier mod to keep from damaging aluminum rims for the 2500's

    In the pics is my oem 2500 rim and a 35x12.5 15 mt. Just a simple 3 inch rubber gasket for the home sewer pipe vent on the roof.
  18. Brian2081

    Braided SS brake hoses

    Sorry this question can go into multiple categories. 2016 2500 CCLB with 2.5 inch RC leveling kit. I am looking to replace ALL 8 rubber hoses with braided hose, brakes have gotten a little soft lately, pump the pedal once and pedal firms right back up. I have been looking around and can't seem...
  19. Brian2081

    A question for the AlfaOBD Guru's.....

    I have a "16" Outdoorsman SLT, I bought OEM LED tail lights to install. The question is, is it possable to disable the "fault sensor" function using Alfa, or am I going to wind up running new wire from the tail lights to the BCM ? Thanks in advance.
  20. Brian2081

    Exhaust discrimination

    Well I have come to the realization that those of us that own a 2500 4x4 cclb are being left out in the cold when it comes to upgrading our exhaust. Been looking on and off for a few months, and cannot locate an exhaust to bolt on. Nobody seems to make a kit for this configuration. This just...
  21. Brian2081

    Cracked front seat bottom cushion spring mount.

    Good Afternoon, while writing up vehicle discrepancies on a pair of 2500s ("12" & "13"), I found the bottom cushion spring mount (pan) at the front of the seat has cracked or broken, allowing the cushion to sink through the seat frame. It is just the outer spring holes that are cracking at the...
  22. Brian2081

    2016 2500 5.7 long bed dual exhaust ?

    Good Evening fellow Ram enthusiasts, I am having a hard time locating a DIY muffler back dual exhaust for my "16" 2500 gasser. Help would be greatly appreciated. Thanks in advance, Brian
  23. Brian2081

    Alfaobd connection problem

    Good Evening to All in Alfaobd land, Unfortunately for you all I am another newbie in this land. I have managed to get my tablet and OBDMX + to play nice together, but will not connect to any module. I have tried 13-17 power net and 16-17 power net, and I still get the same result, BCM not...

Latest posts

Staff online

Members online

... and 6 more.
Total: 1,366 (members: 56, guests: 1,310)
Robots: 1,764

Forum statistics

Threads
195,477
Posts
2,870,748
Members
156,195
Latest member
jerllouk

Share this page

Top