Does anyone know where I can find a set of Solid engine mounts for a 2016 Ram 1500 single cab? I have searched and searched with no luck.
I do not have a Facebook so I am unable to poke around on the high performance ram page.
Any info is appreciated.
Thanks.
My 1st pass down the track and my 8hp90 blew apart and caught on fire, I have no idea what caused this. My truck has destroyed a stock 8hp70, 2 "Built" 8hp70's and now a stock 8hp90. Does ANYONE make an 8 speed that can hold decent power? I have wasted a TON of money on these transmissions that...
I have searched to find the answer to this with no luck yet. Does anyone happen to know the inside diameter of the hose that connects to the check valve barb(smaller barb in the photo)?
2016 ram 1500.
I recently swapped my 8HP70 out for a 8HP90 on a 2016 Ram 1500 single cab, the HP90 trans was from a 2016 Hellcat (Thanks ebay!).
The bottom 2 bolts on the transmission bracket I moved back 1 and 1/8th inch and the 4 vertical bolt holes will have to be drilled out in order to bolt to the end of...
Driver and passenger side available, from a 2016 ram 1500 single cab. Comes with glass also and inside door panel. $440 each, no dents and paint is in excellent condition (bright white). Local pickup only, Lumberton TX.
Pulled these off my 2016 Ram 1500. Comes with the Rails, fuel rail spacers and fuel injector spacers. You will need to buy the 4 fuel rail self tapping screws(any hardware store), crossover fuel line and also the ORB fittings for each end (4 total). These is also an 1/8" NPT port for a fuel...
It is looking like I will be attempting to swap my 8HP70 to a 8HP90, I am looking for some input from someone familiar with this job, a few questions I have....
Will my current flex plate be compatible with a torque converter made for a 8HP90?
What modifications have to be made to my current...
I have a 2016 Ram 1500 and I need to find a compatible 3 Bar map sensor that will fit into this adapter. I have searched for a while but cannot seem to find anything. Any info is appreciated!
I just did a transmission swap and I am attempting to do a fast relearn on my transmission but I keep getting this error. Anyone have any insight what this means? Thanks
Works great, as you see in picture the rubber insulation has slid back about 1/8th inch but does not alter functionality.
Please see note below. I will gladly ship this out or meet buyer in Lumberton TX. Thank you
NOTE: Purchasing an additional tuning license requires that you have a...
I was able to get a 1.51 second 60' with this torque converter. It is a factory Jeep SRT 8 torque converter- 2600 stall.
250$ shipped OR 200$ for Local pickup in Lumberton Texas.
Compatible on a 8HP70 transmission.
I am looking for some input from someone who has swapped out a 8HP70 transmission before. I am about to swap to a built 8hp70 transmission from paramount performance.
Will I have to reprogram my vehicle so that it accepts the new TCM being it is a different transmission?
Any info is appreciated.
My 2016 ram 1500 currently has the belltech 2/4 lowering kit, part # 964SP. Does anyone know the collapsed/extended measurements of these front shocks included in this kit?
I am looking for some QA-1 double adjustable front shocks and I am not sure what model # would be compatible being that...
Seems like my 84mm fastman TB is not closing all the way, engine is definitely idling at much higher than normal RPM. I pulled the TB today and the butterfly plate seemed too far open.
Anyone have any input on a compatible larger throttle body that would work on a stock 5.7 intake manifold?
2016...
Went to the track last night with 100 shot of nitrous mixed with a procharger, I had some serious belt slippage that robbed several pounds of boost but still ended up with some great time slips. These passes were with about 10psi of boost with some MS109 fuel. Once I get the belt issue lined out...
I am setting up my NOS mini 2 controller and the instructions tell me to have the ignition switched on without the engine running and I should be able to see my TPS voltage.
I only see a very sudden small voltage change when I switch the ignition on, when I press pedal to the floor there is...
I bought a universal dry nitrous kit from nitrous outlet, I plan on using NOS mini 2 progressive controller to deliver the goods.
Few questions I need help with.
1. Which wire do I need to splice into for voltage signal from the throttle body?
2. Which wire from the coil pack do I need to splice...
In the process of installing a return style fuel system on my Ram 1500, few snags along the way so far.
You can get away with a single pump and a non return style fuel system for about 600WHP, I pushed my single pump setup to roughly 675whp with the help from a boost a pump but the fuel...
I have been having issues with traction with a Hoosier 28x9.5 slick, best 60' was a 1.55 but had to baby throttle. Searched and searched for a slightly taller and wider tire and landed on these 29.5x10.5 Hoosier radial slicks. I believe this will solve my traction issues I just hope my mph does...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.