Search results

  1. E

    Tuff Country 4 inch lift question

    I know of someone who just put this lift on. It uses a preload spacer and a top spacer on front strut it lowered the sway bar with a simple bracket. And has a bump stop right under upper control arm which are new also . the brackets bolt where holes already exist . The rear is a 2.25 spacer...
  2. E

    Removing 6" RCX lift

    Wow that's an extreme difference I was wondering if you had any regrets with lift but sounds like you are going with a total new look. Have fun with the project. Sounds like just a little work
  3. E

    Removing 6" RCX lift

    I would say you would be good once you weld it back in and alignment you thinking back to stock or down to like 4" reason I ask i think if I'm wrong someone correct me you maybe able to swap out some parts to the Rcx 4 kit
  4. E

    Removing 6" RCX lift

    I have not done this but have heard of someone who has from what I understand you have to weld the original piece that was cut out back in if you still have it. You can not leave the lift crossmember in that would be the only thing I can think of that would require some welding skills other...
  5. E

    best way to level a 2014

    Sorry left that out I plan to just set them at o or.07 wondering if anyone has gone from maxed bils to regular lift pros and cons and if worth doing. I hear the ride is a lot softer with the lift kit?
  6. E

    best way to level a 2014

    Any opinions on removing bilstiens that have been maxed for 20,000 miles and replacing with Rcx 4" lift. Pros and cons. Might ad already have Rcx 1.25 Bl which would stay. Is it worth the money for the ride quality difference and another 1.5" figure I'd end up with 5 1/4" f. 3 1/4" rear when...
  7. E

    best way to level a 2014

    looking to get as much lift to run 35's on a 2014 1500 4x4 crewcab without installing drop bracket lift would like to get at least 4" what is the best set up without sacrificeing truck ie. ball joints cvs etc. thanks have done in past but hear of ball joint issues on 13 & 14's
  8. E

    Best wheel spacers?

    motorsporttech.com hub wheel centric 3/8" made especially for ram 180.00 for 4 highly recommended
  9. E

    4 inch zone lift

    why dont you like rcx only down fall is the rear coil spacer i have been running a 1.75 rear spacer for a year and half no problems i have been in your shoes the last couple weeks bds to much zone a cheap bds rcx well its less for a reason some say import parts maybe the zone...
  10. E

    Bilstein and 2'' TGC rear coils.

    i have 4 goodyear duratracs 275/65/20 for sale 800.00 but not sure about shipping costs would imagine 150 or so ???? tires have 9000 well rotated miles on them i have same set up as you putting 35 12.50s on this week
  11. E

    How to Add Overhead Console

    yes the more pictures the better went to pick up harness today wrong so i ordered the pin out kit you have listed i have been wanting to get this thing installed does the pin out kit come with plug to wire it i would like to hook up both lights so everything works were would i ta that...
  12. E

    How to Add Overhead Console

    side show thanks for this write up i have been down the same road with wrong consoles just ordered another today and see it is the one you have so i finally can get this done with all of your info i am relieved. i was wondering do the wires that come in the kit go into the green connector...

Latest posts

Members online

... and 21 more.
Total: 1,407 (members: 71, guests: 1,336)
Robots: 1,909

Forum statistics

Threads
195,614
Posts
2,872,584
Members
156,440
Latest member
Curly33

Share this page

Top