Search results

  1. Cool_Hand_Luke

    Uconnect 8.4 UCQ (W/NAV) 21.9 update from Canada

    Do you have earlier Canadian firmware? What firmware did 2018 Panasonic radios come with? Thanks in advance.
  2. Cool_Hand_Luke

    Climate Control Issues With UAQ

    I don’t follow. My issue is that temp display is stuck in Fahrenheit and miles in nav. My temp setting jumps to HI after 74 degrees. How does the radio affect the transmission cooling? Everything was working with stock 2013 radio
  3. Cool_Hand_Luke

    Climate Control Issues With UAQ

    Hi I’m having pretty much same issue. 2013 150 Big Horn with 2018 Panasonic nav radio. Also my temp is stuck in F and I’m using all metric! Have you solved it?
  4. Cool_Hand_Luke

    After swapping-New 8.4" radio dead? Plz help diagnose

    Have you solved the issue?
  5. Cool_Hand_Luke

    How to: Add Dual Zone ATC to a Tradesman

    Ok I guess no 2019 RAM parts will fit then.
  6. Cool_Hand_Luke

    How to: Add Dual Zone ATC to a Tradesman

    It’s very hard to find 2013s with dual zone ATC. I know I can pick apart 2019 which had dual zone ATC which I took along with humidity sensor. I will have to track down dzatc trucks. Another question: Would I be able to use rear view mirror with SOS button in my 2013? I think there was a camera...
  7. Cool_Hand_Luke

    How to: Add Dual Zone ATC to a Tradesman

    What about parts for 2014+ 1500?
  8. Cool_Hand_Luke

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    I can confirm that SXM is working on RA4 radio and it detects antenna. Everything works as it should when I put back original radio back into 2013. Even temp controls work perfect with new dual zone ATC bezel. I gotta get my hands on that Sierra card.. if only eBay seller would be quicker in...
  9. Cool_Hand_Luke

    How to: Add Dual Zone ATC to a Tradesman

    Congrats on the mod. I wish there was a video tutorial to watch before I attempt this mod. I have replaced condenser out of a Jeep before lap I know this is more advanced and bit harder to do. It would put my mind at ease when removing the dash. Does anyone know what part # and/or how many I’ll...
  10. Cool_Hand_Luke

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    I can confirm that Travel link icon is there and I can access all SXM services after enabling it with JSCAN but they all are tied to Nav. Since my Nav is not working properly ( shows in in Michigan) and im in Ontario it shows everything there.( weather,gas stations,movie theaters)
  11. Cool_Hand_Luke

    8.4 Uconnect with Nav Conversion from Canadian to US to Gain Apps Function

    Does your screen look like mine? I’m in Canada and installed 2018 radio. Do you have travel link subscription and is it working?
  12. Cool_Hand_Luke

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    Hey, I’m in Ontario. I got 2018 radio in my 2013. Does your travel link work as part of Sirius XM? I subscribed to all 3 services but my Nav doesn’t work or travel link service just SXM radio.
  13. Cool_Hand_Luke

    HVAC problem with UAS upgrade in '18 truck

    Sorry, I filled the the form online. Not sure why it went to spam folder. I think I posted more info on here than i wrote in the email. I guess I’m looking for a harness that will convert my single zone MTC to single zone ATC. I have temp and humidity sensors bought and ready to go.
  14. Cool_Hand_Luke

    HVAC problem with UAS upgrade in '18 truck

    Did you find the solution? I have same but inverted issue. My truck is all metric, but when I swapped my radio, the temp was in Fahrenheit.
  15. Cool_Hand_Luke

    HVAC problem with UAS upgrade in '18 truck

    Keep us posted. I’m curious to find out.
  16. Cool_Hand_Luke

    HVAC problem with UAS upgrade in '18 truck

    Hi guys, I read all 19 pages of this thread. My issue started when I wanted to get CarPlay. My truck is 2013 RAM 1500 Big Horn with 8.4” Uconnect and single zone MTC ( with SXM) I’m in Canada btw. I got a hold of used 2018 radio with NAv out of 2018 RAM ( Panasonic). I connected the radio and I...
  17. Cool_Hand_Luke

    radio swap

    What radio is currently in your truck and what are you swapping ?
  18. Cool_Hand_Luke

    8.4 radio programming

    Hi, I know this is old post but have you solved your problem? I also have 2013 1500 Big Horn with single zone manual controls and installed 2018 radio. BCM told radio what zone I have and after couple of hours is changed from dual to single. So far things work but there are issues. Just like you...
  19. Cool_Hand_Luke

    8.4 Uconnect over the air update failure

    Could you help me updating my 2018 VP4R radio to the latest firmware? It is a donor radio and i dont have a Vin#. Any help would be appreciated.
  20. Cool_Hand_Luke

    Need Help with Uconnect 8.4 Update

    Having same issue with NAV. I swapped 2018 radio into my 2013. Right away NAV was frozen and not updating my current position. Were you successful performing soft reset? How do you do it? What about hard reset? Original firmware says it has 18.13 version on it. Would like to upgrade to the...
  21. Cool_Hand_Luke

    Uconnect 8.4 w/NAV to Uconnect 8.4 UAQ w/NAV - CarPlay

    Congratulations on getting CarPlay on your RAM. I'm in the same predicament. I have 2013 RAM 1500 and just installed radio VP4R off of 2018 RAM. The round sticker on the radio says it got 18.13 Firmware. There is a way to find out the latest version via dealer mode but i don't know how to access...
  22. Cool_Hand_Luke

    Manual load/update software for Uconnect 8.4 (2018 RAM 1500 Laramie)?

    Have you solved it? What Uconnect version are you running?
  23. Cool_Hand_Luke

    UAQ /UAS , Better yet, Uconnect in general with USB C ports :)

    How can I order the conversion harness? I would like to replace my 2013 media hub with USB-C one and need a harness to connect to my newly upgraded 2018 Panasonic CarPlay radio.
  24. Cool_Hand_Luke

    UAQ pin out connector for backup cam, solution here!

    Where did you get rca to 2 pin adapter? There are 2 wires in rca plug, one is video the other is ground. So would ground go into pin 32?
  25. Cool_Hand_Luke

    Rear Door Lock Fixed

    I will try this soon! thank you
Top