Search results

  1. Dan90

    Pedal Commander help

    The Pedal Commander has major radio frequency issues. That is why I pulled mine. When off roading using radio comms, the VHF radios trigger the PC and cause it to throw a throttle code and put you in limp mode. That is probably why others have mentioned random encounters of this happening. They...
  2. Dan90

    Trx driveline swap on a 2012 ram 1500

    Yes this is what I meant. After looking closer looks like ADV concepts.
  3. Dan90

    Trx driveline swap on a 2012 ram 1500

    @Boosted Motorsports has some youtube videos you might be interested in :) Also, truck looks good so far. Who did the fiberglass fenders?
  4. Dan90

    Anybody know what the heck this is?

    Looks like this bolt has been tampered with before. Was the heat shield removed?? The small bolt that holds the heat shield to the stud is still threaded (rusted) on the stud. Whenever mine broke, they didn't just fall out because the broken part of the bolt was still attached to the heat shield...
  5. Dan90

    Carven Progressive Exhaust ordered! Am I gonna like it?

    Same setup for me and exact same range I felt there was drone. Wasn’t terrible but after 2 years wore me down and I was sick of it. Still loved the sound of the Carven at idle and especially on acceleration but just couldn’t handle the drone on highway anymore.
  6. Dan90

    off-road emergency gear

    I don’t think I’ve seen anyone mention traction boards. Actiontraxs makes some great boards. I’ve probably used this tool more than any other and they don’t take up much room. They are especially helpful if you off-road by yourself. Crazy the amount of mud, snow, sand you can get out of with...
  7. Dan90

    Lower control arm ball joint replacement

    Digging up this older thread... is Master Pro line from O'reilly's still the consensus for quality joint only replacement? Need to replace my lower ball joints for "excessive movement". 88k miles and it sees off-roading several times throughout the year. I'm of the opinion OEM is best for...
  8. Dan90

    Exhaust Manifolds

    curious, which brand shorty headers did you put on? I had a similar experience with JBA's a while back and drove me to put stock manifolds back on. Would go with a quality long tube (ARH) if I were to do it again.... which I might need to do considering I have a broken passenger side front...
  9. Dan90

    Just got a 4th Gen

    Congrats! Looks awesome. I love the color.
  10. Dan90

    Fitting suspension tips

    I think you missed beer on that list. Good luck with the install.
  11. Dan90

    Clunking sound

    ICON UCAs have served me well. Sealed, which is why I went with them, and as close as you can get to a true uniball setup. Not a huge fan of having to maintain with grease but the price you pay for something to withstand a beating and not fail. That bushing doesn't look great, but just incase...
  12. Dan90

    Sport Hood Bezel LEDs

    This is awesome. Nice work! Looks great.
  13. Dan90

    Sold

    Sold
  14. Dan90

    Sorry for delayed response, Nick has Covid

    Sorry to hear this, Nick. Body follows the mind, stay strong. Rest up and get well soon!
  15. Dan90

    November 2021 Winner - Dan90

    Thanks @j-b !
  16. Dan90

    Exposed Engine Bay at Body Shop

    Agreed you handled the situation properly. I understand your frustration. With the amount of water, snow, mud and pressure washes my engine bay sees. I'd be shocked if you have any issues resulting from this. Had my vehicle pointed in the wrong direction during a snow storm before. Blew the...
  17. Dan90

    Electronic Power Steering noise

    Likely won't give you any safety issues like lock up or no steering. If something like this were to happen you'd get dash lights. But it is a real possibility to have noise resonance from EPS during specific steering manuvers. Sounds like you were either unfortunate to have something about your...
  18. Dan90

    Power steering conversion

    No, you can't do this without swapping all other electronics and control modules in the vehicle. The reason is the communication with the vehicle and the steering rack that takes place. Referred to as the vehicle architecture "Powernet". Electric power steering racks rely on the CAN...
  19. Dan90

    Can I leave the truck running and take the key into the store?

    You can leave the truck running and take the key fob. Use the keyless entry button on the door handle to lock the truck while it's running. Or the button on the interior door panel. Without the key fob in the vehicle it will keep chiming until the fob is back in the vehicle.
  20. Dan90

    November 2021 Winner - Dan90

    Thanks all!
  21. Dan90

    Considering going from 20s to 17s...

    I went from 20" stock sport rims to 17" methods. In my opinion ride quality is better. Technically you should get better handing with the 20s due to less/stiffer side wall but hey let's be honest these are trucks (different story if you are lowered). I run 35s.
  22. Dan90

    Diablo Predator 2 tunes

    I'm no expert but your truck should accept a tune no problem pending you have the right tuner for the vehicle. It should come pre loaded on the tuner so the 87 and 91 tune you are seeing are what are available. Should be able to plug it in (OBD port), put the truck in "run" (engine off) and load...
  23. Dan90

    What did you do with your 4th Gen this week?

    PPE trans pan and fluid. Had to drop the exhaust to fit the PPE pan. You can see it's still down in the pic.
  24. Dan90

    The harness to nowhere?

    Yep, 110V plug.
  25. Dan90

    Opinions, S&B Intake, dry or oiled???

    this is pretty clever. Nice work. I run oiled filter. Cleaning is easy and if you are daily driving on roads, likely will last much longer than a paper filter before needing to wash. Sounds like for you (OP) there is an upside with going oil (saving money) but not really an upside with going...

Latest posts

Staff online

Members online

... and 8 more.
Total: 1,413 (members: 58, guests: 1,355)
Robots: 1,537

Forum statistics

Threads
195,454
Posts
2,870,469
Members
156,162
Latest member
snipermaven

Share this page

Top