Search results

  1. 2

    Transmission Troubles

    Mr. DEAN2, thank you for your help on this matter!! As you suggested, I went to a shop and the gentleman said its a control issue... With it being pre-obd2 he has no sure way of helping. As per him the converter is ok... He can rebuild for $2500. but that may not fix it. The TCC cost he says is...
  2. 2

    Transmission Troubles

    Hello to everyone looking at my post and thank you for your time. My 95 was having a little trouble shifting lately ( now that's its cold up here in North East ) so I decided to change the filter and fluid. After completing,,, the trans wants to bough down the motor by shifting to drive to soon...
  3. 2

    Cab & Frame Identity

    Hello and thank you for looking at this post... I have a 03 2500 4X4 short bed. I purchased a 04 2500 that is frame and cab only from a friend of a friend. Brought it home to replace mine that is very well shot, due to the rust. I ran the VIN at a local dealer to be sure, and low and behold, it...
  4. 2

    poly or rubber mounts

    Restoring my 95 2500 cummings from the frame up and seeking input on which body mount bushings to use and why one would be better than the other. Thank you
  5. 2

    Frame

    unfortunately it will not open for me, thank you anyway.
  6. 2

    Frame

    Mr. grpht03ram, Thank you very much for you time and efforts, I do hope it will help me.
  7. 2

    Frame

    Hello. I would like to know if anyone can help with info on my 03 2500 5.7l auto 4door 6.5bed frame. Seeking a used one because the amount of work needed to restore this is not worth it to me. Question is : What years and models can be used. Any info would be greatly appreciated, and any info on...
  8. 2

    heat/ac issue

    Hello to all and thks for looking at my post. My issue is the ac/heat blows out the defrost on acceleration and when I let off it goes back to the selected position. I can hear a door shut when letting off. Is there anyone who experienced this issue. And what was your fix. I'm putting a heater...
  9. 2

    Transfer help

    I shall try it. Thank you sir, for your time and efforts..
  10. 2

    Transfer help

    I have the HD model.... As far as the pic, I don't know. There is not enough to know. All that's left is the inside diameter ring and maybe 3-5mm more that is attached to it... Thank you
  11. 2

    Transfer help

    There is VERY little left... Not enough to identify. I have the part# from the dealer. If that helps, look at original post... Thank you l
  12. 2

    Transfer help

    Hello everyone. I rebuilt my NP241HD for my 95 2500 and the " slinger seal " was destroyed. I went to the dealer and the part is discontinued. Part # 4210611 I did some web searching with no luck. Can someone tell me or guide me in the right direction so I can finish this. Thank you....
  13. 2

    Blacklisted by Dealership

    I have to agree with Seth.... As a former mechanic in dealerships, I should represent the integrity of the dealership by NOT , bad mouthing or seeking where I don't belong!!!! In my eyes you did right, ( because management is like government, lie to save yourself ) and more people should as to...
  14. 2

    Frame

    Thank you Sir. Your time and efforts are greatly appreciated.
  15. 2

    Frame

    Thank you Sir. I see 1500's in that year, no chance of them interchanging????
  16. 2

    Frame

    Hello everyone. Just bought a 03 2500 4X4 5.7l My intention was to part it out, but the little lady called it hers... Ouch So, the rear half of the frame is in need of work... Lots... I was thinking of purchasing a wrecked or bad frame in the front , so I can cut and use the rear section. It's a...
  17. 2

    Front rear

    Hello everyone. I have a 95 1500 4X4 with the Dana44 that the perch rotted out. I'm seeking around for a used one. My question is, what years do they fit??? Thank you
Top