Search results
-
Sluggish / Low MAF reading
Yeah bone stock and no codes, I’ll check that out and see what I can find thank you I can’t really find any good data of the numbers I should be looking for on the MAF in LB/M- TwinSuns
- Post #8
- Forum: Engine & Performance
-
Sluggish / Low MAF reading
So far I swapped it with a STP high flow air filter and while it seems to have a little more pep, the MAF numbers are still the same ♂️- TwinSuns
- Post #5
- Forum: Engine & Performance
-
Sluggish / Low MAF reading
I had originally thought along those lines, but I use the hot shots additive every fill up and have been through 6-7 tanks of fuel and it’s still acting the same unfortunately. I’m using a Wix filter, which I used everytime I’ve changed the filter with success, has me stumped- TwinSuns
- Post #3
- Forum: Engine & Performance
-
Sluggish / Low MAF reading
Currently driving across country and my Ram 2500 6.7 is feeling really sluggish, very little power when I put the pedal down but still getting good fuel economy. Just changed the oil / air filter / fuel filters a few weeks ago. Currently getting around 1.7 LB/M at idle and around 10 LB/M...- TwinSuns
- Thread
- Replies: 7
- Forum: Engine & Performance
-
Reading Transmission Fluid level with THERMAL BYPASS VALVE
Thanks for the reply It’s the 68RFE, just trying to to grenade it before I can do the VB and deep pan and such- TwinSuns
- Post #3
- Forum: General Discussions
-
Reading Transmission Fluid level with THERMAL BYPASS VALVE
Looking to see if anyone has any insight into maintaining the correct transmission fluid level after installing a thermal bypass valve. With it installed the transmission never gets close to the 180 degree mark to have an accurate measure of the fluid when hot. It generally runs 140-145 max...- TwinSuns
- Thread
- Replies: 3
- Forum: General Discussions
-
Paint Code KAR. Let's see those Maximum Steel Metallic RAM Trucks!
Just finished color matching! -
Paint Code KAR. Let's see those Maximum Steel Metallic RAM Trucks!
They are alpharex! -
DIY: 2013-2018/Classic OEM Foglight Wiring (& some 09-12 info)
Just finished my fog light install, thanks again to @Mpgrimm2 ! I did the install on a 2018 Ram 2500 Cummins and thought I’d add some photos of how I routed the wires around the inner cooler / bumper / frame. Also included photos from Alfaodb of how to enable the fog lights and how to turn off...- TwinSuns
- Post #77
- Forum: Audio & Electronics
-
How to Add Automatic Temperature Control (ATC) to a Manual Temperature Control Truck
Just finished the ATC conversion on my 2018 Ram 2500 6.7 Cummins. Thanks to @Mpgrimm2 / M2 Mods for all the help with it. Solved all of my issues that came with upgrading to the 8.4 UAS. Found that either disconnecting the negative battery terminals or letting the truck sit over night in between...- TwinSuns
- Post #869
- Forum: 4th Gen DIY
-
A/C only works on Max after UAS 8.4 upgrade
Update: Just did the ATC conversion with the help of @Mpgrimm2 / M2 Mods and it solved all the problems, I highly recommend it! http://www.ramforum.com/index.php?posts/1458159- TwinSuns
- Post #8
- Forum: Audio & Electronics
-
A/C only works on Max after UAS 8.4 upgrade
Awesome, I appreciate the help! I’ll message you to confirm what I need and place an order.- TwinSuns
- Post #7
- Forum: Audio & Electronics
-
Door Panels: 2018 Ram 2500 Crew Cab Black
For sale, 4 inner door panels from my 2018 Ram 2500 crew cab in black. In great condition, pulled out of the truck with less than 1,000 miles on it. Comes with window switches on all 4, both front door upper column trim pieces, and 4 trim pieces next to door handles. Asking $150 OBO if picked up... -
2014 2500 with 6" BDS Lift and 37" 13.50s
Awesome, been up there a ton growing up!- TwinSuns
- Post #4
- Forum: Member Trucks
-
Paint Code KAR. Let's see those Maximum Steel Metallic RAM Trucks!
My 2018 2500 6.7 Cummins -
-
2014 2500 with 6" BDS Lift and 37" 13.50s
Looks awesome! Where at in Michigan? I’m from a little town called Marshall right where the I-94 and I-69 meet.- TwinSuns
- Post #2
- Forum: Member Trucks
-
I’ll use this as my “ build log “...
Awesome build, keep it up!- TwinSuns
- Post #701
- Forum: Member Trucks
-
Infantry Vets build thread
Great build! Love seeing the progress- TwinSuns
- Post #70
- Forum: Member Trucks
-
Does my track bar need replacing?
I replaced mine when I put my Thurens on as well and has been great! Definitely worth the money. Drag link upgrade next.- TwinSuns
- Post #9
- Forum: Heavy Duty
-
Best leather cleaners?
Zaino for sure! Had a product from Renegade too that worked great. -
-
Tire Pressure Readout Question
Mine always takes a little bit of time to correctly adjust too. My rear tires seem to fluctuate less, I’m assuming because there is way less weight on them then the front. I also suggest doing a chalk test on all four tires to get a better idea of what PSI to run. There’s generally no need to... -
Does anyone even have the seats in the back down anymore?
Awesome, thanks for posting all of that! -
So we got the RAM back. Tell me what you think.
awesome, can’t wait to see it!- TwinSuns
- Post #123
- Forum: General Discussions
