Search results

  1. RAMbow

    How to Add Overhead Console

    Anytime! There are alot of great folks here who are always more than happy to share their knowledge and experiences to help others! Hope it all works out for you and if you have questions, just post them here. Sent from my iPhone using Tapatalk
  2. RAMbow

    How to Add Overhead Console

    It can seem a little overwhelming, but i did also cut out the holes in the template i made so that i could line up where it snapped in and that became my reference visually to feel comfortable in cutting the rest. Sent from my iPhone using Tapatalk
  3. RAMbow

    How many miles on your 4th Gen Ram

    2015 Tradesmen 188K, still truckin along Sent from my iPhone using Tapatalk
  4. RAMbow

    How to Add Overhead Console

    The template was 10 3/5 x 5 3/4. I marked the mount holes for the inner assembly and then cut a starter hole to get a reference once i put the liner back up. I slowly cut wider and wider until i could reference the holes. After that, i traced the entire template with pencil and make the final...
  5. RAMbow

    How to Add Overhead Console

    Ok, so i installed mine today, no compass or LED just the courtesy/map lights. Was really pretty simple, and took about 1 hour. Wiring wise here is what i did: 1. Ground i spliced into dome light ground just above green connector (too half) 2. Courtesy pwr spliced into same place but the other...
  6. RAMbow

    How to Add Overhead Console

    Question....about to install my console in my 2015 tradesman but i dont have schematics and want to know where i can best tap into for just the reading lights 3 wires. Below is my current green connector on driver side dash panel. Any help is greatly appreciated. Top Bottom Sent from...
  7. RAMbow

    AlfaOBD

    Yes, door modules need to be relaced as well, and then set the codes with alpha obd.
  8. RAMbow

    DIY: 2013-18 (19 classic) Power Fold Mirror upgrade/Notes

    Just fyi for any folks replacing the switch i can confirm this non oem switch works well, not a lighted fold button but, works same as as oem. Sent from my iPhone using Tapatalk
  9. RAMbow

    Power seat, Heated and AC upgrade /conversion

    Id suggest hitting up deereguy on here, he can actually build you all the harnesses that you will need. Its a pretty intense mod but certainly can be done. I just did it in my 2015 and added all limited leather seats powered heated cooled and memory. Took me about a day and half to knock it all...
  10. RAMbow

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Finally able to grab a couple decent pics after all upgrades. I have done premium cluster, 8.4 UAQ, laramie limited door panels and limited seats. All pretty large challenges going from a 2015 tradesman. Could NOT have done it without the help of great members on this board!! Thank you to all...
  11. RAMbow

    Mystery Connector

    I actually just installed all new limited seats in my tradesman over the weekend. Those connectors on the rear seat are used for both LED and heat if you have heated seats and the wiring. If you are looking to make it all happen, hit up deereguy as he makes great harnesses.
  12. RAMbow

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Finished up my install today....huge thanks to deereguy, he really makes too notch harnesses and it helps greatly when doing the upgrade. All functions working good, just waiting for xm to come back shortly. Sent from my iPhone using Tapatalk
  13. RAMbow

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Will be receiving deereguys harnesses today and beginning the install on my truck. Installing limited seats and plan to enable memory/heat/cool and rear heat as well. Fingers crossed it goes smoothly lol. Will try and capture some good install steps with pics and possible video and post here later.
  14. RAMbow

    LED DOOR HANDLE BEZELS / NEED HELP

    Here are the parts Sent from my iPhone using Tapatalk
  15. RAMbow

    LED DOOR HANDLE BEZELS / NEED HELP

    My new door panels already had them in there. But you can run 18ga wire instead, but just need the connectors. Deereguy put up a list of parts to build your own. Search for door panel upgrade and you can see it there. Sent from my iPhone using Tapatalk
  16. RAMbow

    LED DOOR HANDLE BEZELS / NEED HELP

    Just did mine last week, was a very simple setup. I installed limited panels which came with the LED handles and map pocket leds. The cable was there for the map pockets, so i cut it in the middle and ran the connector to the handles, spliced into C5 connector and ran wires to pin 3 and 9. The...
  17. RAMbow

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Great advice rick! Will do for sure.
  18. RAMbow

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Yes sir, got that. Looks like i can snag a wheel with heat, controls, clockspring and airbag for 140. Sounds decent.
  19. RAMbow

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Thanks rick, good to know. Im kosher on the 8.4UAQ upgrade ive already done so it should be plug and play. Finally, an easy one
  20. RAMbow

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    One question for the smart folks, can i replace current steering wheel with a heated one with clockspring, that has the additional audio controls and VR buttons, will this plug and play (besides enabling in alpha) with the current 2015 tradesman setup, or will i need additional wiring?
  21. RAMbow

    Tailgate LED Light Bars...do the mess with towing package?

    Just more FYI, for magnents, i used these from Harbor Freight, 2 of them, and they fit perfectly and wont budge unless you need it to. https://www.harborfreight.com/18-in-magnetic-tool-holder-60433.html Installed on each end, only removing adhesive tape just enough for the back side of the...
  22. RAMbow

    Looking for front center console trim pieces

    Hey benny, im looking for 5VC941Z6AB any good pricing on these? My initial searching only come back with fairly pricey rates. Thanks
  23. RAMbow

    How To Add Heated/Ventelated seats and Heated Wheel to Express/Tradesman

    Well im about to make the leap on this interesting project. Learned a ton reading all through this thread and man oh man, it shall be a challenge. Already hooked up with deereguy and got my harness on order, just waiting now for the limited seats and console to arrive in a week or so. Rest...
  24. RAMbow

    Power Seat Wiring Harness

    Deereguy, i plan do do this upgrade on the seats in the coming weeks/months after acquiring all needed parts. Im starting with a 2015 tradesman and plan to pickup 2015 laramie leather seats, heated/vented fronts and heated rear with the console. I do have the UAQ radio mod complete already. I do...
  25. RAMbow

    M² Mods Intro & Project List

    Newbie here, but planning on the seat replacement and would like to get the haraness from mike. How should i start the process of ordering?

Latest posts

Staff online

Members online

... and 11 more.
Total: 1,304 (members: 61, guests: 1,243)
Robots: 2,015

Forum statistics

Threads
195,608
Posts
2,872,493
Members
156,430
Latest member
Alaskan3500

Share this page

Top