Search results

  1. R

    Capacitor for DRL

    I saw a post from lpennock mentioned using a 6000µF between the high beams if using LED for high beam. I bought a pair that handles 16V and have made an adapter for them. Now whenever I put the truck to drive, it will go on and off three times before I get a message that says the high beams are...
  2. R

    WebElectric DRL-1 Module

    I don't know if I'll get a response for this but for those whom have bought said product listed above, was there any trouble getting it to work? I recall that there are some posts using this module on certain Ram trucks with success. I've recently installed them on a 2004 Toyota Sequoia and a...
  3. R

    TYC Ram Projector Headlights

    I'm intrigue into buying a pair of the TYC Projectors after seeing that they're more affordable than the OEM and most people like them. Are there any other sites than eBay to buy them and has anyone else had a good or bad experience with them?
  4. R

    Reason for low beam change in OEM halogen projectors?

    So there's two types of halogen projectors where the 2013-2015 is 9012 and the 2016-2018 (2019 and up for classic) is 9005. What was the reason for the change?
  5. R

    LED parking Lights

    I got my retrofitted headlights from Retroshop and they left me some wires that powers amber LED inside the side marker. I really don't want to splice into the factory wiring. Are there any other solutions I can try?
  6. R

    V6 Triton Extreme Switchback resistor

    I want to get the V6 Triton Extreme switchbacks for my turn signals, but given past experience (parking light out) with other switchbacks before I just avoided it. I understand AlfaOBD can only do so much, so VLEDS offers resistors for them without the need for splicing (in certain cases). Link...
  7. R

    Check engine light (MIL) but no faults found.

    It popped up about a week ago so I decided to take a look at it with AlfaOBD. I had them resolved, but the light still stays on. The second time I check, the software claims that no faults are found. I've tried disconnecting the battery but it comes back up the second time around. The dealership...
  8. R

    MLED 2.0 and DRL

    I'm planning on Retroshop do a retrofit on some quad headlights and I'm choosing the MLED 2.0 for the low beams. Would running the high beams as Daytime Running Lights be out of the question if installed?
  9. R

    What makes the OEM black reflector headlights less expensive than the chrome version?

    So I'm trying to a find a decently priced pair of chrome reflector headlights and most online places sell them for $500 or more. And apparently the same reflector headlights in black are far less expensive. What gives? I know that there's aftermarket options out there but my intention is to go...
  10. R

    Retrofitting OEM projector headlights

    I am gathering up information on how to retrofit some projector headlights at the same time finding some OEM chrome projectors. Most of the previous posts are about HID projectors but I would like to install the Morimoto MLED 2.0. Is the task tedious, or is it best to have someone else retrofit...
  11. R

    DDM Tuning Saber ProX 55W Accu/V2

    So I recently discovered that this company (DDM Tuning) is offering 4500K LED bulbs which is a great compromise color since most options out there are 5000K or above. Has anyone had a chance of trying them out? Link...
  12. R

    2004 Toyota Sequoia DRL question

    So a while ago, my parent's low beam DRL turned off and I could not get it to turn back on. I've replaced the fuses, put new bulbs and looked at the cable hidden by the battery that powers them (which is still connected). Does anyone have any ideas that I can look into? Also, can I transfer the...
  13. R

    Morimoto XB Gen 2 Fitment issue

    So I've recently installed the Morimoto XB Headlights on my Ram 1500, and for some reason I cannot get the passenger side headlight to "pop" in place. Does anyone else has this issue. Note: I can't exchange them since I bought them open-box.
    • Rotciv
    • Thread
    • headlight assembly morimoto ram 1500
    • Replies: 3
    • Forum: Exterior
  14. R

    Black or Chrome OEM Projectors

    I am thinking of getting factory projectors for my 2016 Ram 1500 Lonestar with the Bluestreak Pearlcoat color. I'm looking for opinions whether a set of black or chrome projector headlights would look best on a truck that is generally chrome styled. So far, I haven't had luck find pictures...
  15. R

    Hi/Low Beam or Turn Signal DRL

    Anyone has an opinion on which one is more effective? I have the factory quad headlights.
  16. R

    Flicker with LED High Beam

    So I have the GTR Lighting CSP Mini 9005 for my high beams in the Quad halogens and I have them set as DRL, although I've noticed there is a tendency for them to flicker. I've already bump to 12.2v for the DRL voltage with AlfaOBD mentioned by Ippennock in another thread, but the flicker is...
  17. R

    LED bulbs in OEM Quad reflector headlights

    So I've bought the Morimoto 2Stroke 3.0 on black Friday for my factory Quad reflector headlights. While they are brighter than halogen and has a nice cutoff, maybe it's just me but I can barely see the road beneath me that I'm having to rely on my fog lights (also swapped with LED bulbs) for...
    • Rotciv
    • Thread
    • 2stroke beam pattern headlight led morimoto
    • Replies: 18
    • Forum: Exterior
  18. R

    BCM Swap

    I want to know what steps are there to swapping one on my 2016 Ram 1500?
  19. R

    Switchback bulbs for quad headlights

    Does anyone have a recommendation for a good pair of LED switchback bulbs? I've recently bought a pair from LASFIT, but the white diodes on them aren't bright during the daytime. And ever since I activated DRL on my truck, only the amber diodes are utilized.

Latest posts

Members online

... and 5 more.
Total: 1,064 (members: 55, guests: 1,009)
Robots: 1,690

Forum statistics

Threads
195,603
Posts
2,872,409
Members
156,413
Latest member
ragarm33

Share this page

Top