Search results

  1. P

    You should do this…

    I'm going to say when you do this job .. Put on a pair of rubber gloves.. There can be some really nasty items in there. Dead rats .. snakes.. spiders.. & Nasty decayed leaves .. I worked at Chrysler for 11 years not much bothered me... But I sure hater to reach in there & See what my price...
  2. P

    Where to buy a ac/heater control vacumm pigtail?

    SUPER Diagram .. THANKS ..
  3. P

    I have a 1987 D100 318 with the holley 2 bbl carb, this thing runs fine a high rpm but it wont idle after the choke cuts off, it dies,

    Does it have a carb... I was thinking the 87's have TB. Not a carb.. & That's OK if that's what you meant. ...If it's an electric fuel pump I'LL SAY CHECK & MAKE SURE YOUR . Fuel pressure is correct down at ideal .. .......... ......I'm not saying this is your issue.. But while I WAS AT...
  4. P

    WHAT THIS PART. 1988 5.2L

    I'm Sorry for not getting back on here.. & As everyone says I'm too busy. 75 years old & Still farming or at least checking the cows.. & This weekend I've been checking 2 different neighbors calving cows.. I went to one of my neighbors 5 times yesterday .. & Checked his special DARLINGS. Last...
  5. P

    Where to buy a ac/heater control vacumm pigtail?

    Do you have that Routing information available .. I'd sure like to have a copy of it. & That is the connection I thought you were looking for.. I did not have another one on that truck I went & checked it.. But I'm thinking now I need another for my 1988 Flat Bed. I'm going to put mine back...
  6. P

    New to me 1984 Dodge Power Ram 250

    OK I'M GOING TO SAY YOUR talking about your 1984 Ram 318. If so then it should be the 727 trans... I going to say go ahead & drop the pan & do a filter change . .... But ... Now read own.. Since you don't know it's mileage.. I worked at Chrysler for 10+ years from about 1996 maybe until 2005...
  7. P

    WHAT THIS PART. 1988 5.2L

    18 Crew ... No Sir not a bad wire.. Wires are 6+ inches from that spark.. wish It was a plug wire.. But I'd certainly not have post about a wire on here. ...... Just for the record .. The 3 of us looking at that truck that day.. HISTORY. I'm 74+ NOW & I owned a parts store Biggest of 5 in our...
  8. P

    Where to buy a ac/heater control vacumm pigtail?

    WELL Tell us what year model yours asking about.. SOME of us have worked on a lot of different rides... & If any way post a picture.. I hate it when members say this to me, because I can't get pictures to post on here.. But i HAVE A COUPLE of old rides down behind the house & my ram charger has...
  9. P

    WHAT THIS PART. 1988 5.2L

    Heck I can't get up & Back there to see it myself..BUT SURLY there's not but one or 2 items attached to the back of the block ..& going to that one wiring harness going from side to side of the firewall.
  10. P

    WHAT THIS PART. 1988 5.2L

    Wow 98 readers & noone know what this part is. ..
  11. P

    WHAT THIS PART. 1988 5.2L

    so my Dodge 1988 D250 BUT MINE HAS A 5.2L. iT SPINS OVER BUT NO LONGER STARTS UP OR RUNS. so WHILE A COUPLE OF FRIENDS & I WERE TRYING TO get it started .. ONE FRIEND WAS TURNING IT OVER & we could see a fLash of light . Like a flash each time it was firing.. This flash is coming from the...
  12. P

    First gen

    Our local shops have gotten together & Now charge 1000.00 to cover & FIx up a bench seat.... I'd rather have just a feed sack over it. Than spend a 500.00 . ........... ......Any thoughts on what it's now costing across the Nation... My wife says I'm just old fashion ..
  13. P

    First gen

    THANKS FOR YOUR ANSWERS ... YOURS & CHAR are the answer I Look for mostly. Thanks . My 1988 wont start so I'm planning on dragging it up & swapping attempting to swap my seats Next week.. ...U2slow do you know if I can buy a factory seat cover for my bucket factory 87 seat ..My driver side is...
  14. P

    1988 W150

    Piston . What parts are you have issues finding. I have a 1988 3/4 flat bed. & I've managed to find every thing except some in dash AC door stuff. AC & HEATER ITEMS. i have gotten most of what I need from LMC .. & OUR LOCAL napa & Carquest STORES HAVE GOTTEN THE REST OF MY NEEDS.
  15. P

    First gen

    Ok I'll say My Pick-up is a D250 1989 , & MY RAM Charger Is a 1987... SO Do you think .. My Buckets will fit with just drilling more holes.. & Possibly adding maybe a spacer of some sort to level out my seats. I Believe I'll have to drag them out of storage & See if I can install them. ...
  16. P

    5/8 Wheel studs

    .... Been too many years ..But as I recall .. Dodge made D250 & D300 or D350... D300's were light duty one tons & Were mostly said to be the same MOSTLY as the D250's .. It was said that the emblems were the only differences. But as I recalled the D300 had one ton axles ... SO Someone in the...
  17. P

    1998 Ram 1500 Fuel Gauge.

    I don't think it's your fuel pump I'd say more likely the gauge in the cluster .. But i TOO HAVE HAD LOT OF TROUBLE with 2 of my Gen 1's. ... In my opinion buying another cluster off E-Bay .. & Put it in 1st .. or pull the gauge & swap with your cluster . now I may be wrong as it's been several...
  18. P

    ISO ... in search of. auto/od A518 or 47RH

    WOW B/C Canada ..Yes I'd say your a long ways from My Beloved Texas .. As I live in the center of Texas & I'd not have much problem going into 1/2 of New Mexico Oklahoma maybe a 1/3 of Louisanna .some of Arkansas .. As I said we went to Missouri & picked up this old 1952 Ford F3 .. iT'S NICE TO...
  19. P

    Dash light wont come on

    i'D SAY iT's most likely the printer circuit on the back of the cluster... If I'm wrong Guys on here will most likely let me know .. I just got another cluster & Put in my truck.. I didn't care about the miles. As mine is just an old farm truck.. But I got one that turned out to be worse than my...
  20. P

    ISO ... in search of. auto/od A518 or 47RH

    Darn I was hoping for a long shot here, maybe someone would have a tranpull out or one that needs rebuilding..
  21. P

    ISO ... in search of. auto/od A518 or 47RH

    ... i'D LIKE TO FINE a pull out trans ... 1995 auto Over drive.. I'd like to have TQ & COMPLETE 2 wheel drive trans .. If it needs or has to have an overhaul .. I can handle that, or if I can just put it in .. I can do that also .. Because If I put 1000 or 1500 miles a year on it .. That's all...
  22. P

    First gen

    How much trouble were those Ram Charger seat & Console to put in.. I have a set of those for my D250 .. But they Don't fit.. OK Let me say my stock seat has it's locations to mount .. But the Ram Charger has DIFFERENT MOUNTINGS on the floor board.. SO It appears to me that I may need to cut...
  23. P

    I BELIEVE I have throttle body problems

    WOW That i believe that's the best advice I've every gotten on a question on a sight like this.. Now Guys also I worked at a Dodge dealership for 11 years I was a service advisor in the shop. SO I've seen a lot of repairs . But that was years ago . I went to work there in 2004 I believe. So Not...
  24. P

    I BELIEVE I have throttle body problems

    OK my 1988 DODGE 318 D250 ..Yes I feel I own the only 5.2 not 5.6 3/4 TON DODGE TRUCK. It's been a farm truck all it's life so I really feel it pnly truly had 43,000 miles on it. If it has more then it's 143000. But the way it still drives I'm saying 43K. BUT THAT REALLY DOESN'T MATTER...
  25. P

    I have a 1983 d150 with a slant six.i just bought it. The lean burn unit is off the air cleaner laying on the fender. Most of the vacuum lines are off

    i THOUGHT THE NO POINTS STARTED IN 1985. But doesn't matter if it doesn't have them then it some HEI system. i SOMETIMES go to old time used book stores & fine old Manuales ..

Latest posts

Staff online

Members online

... and 5 more.
Total: 1,261 (members: 55, guests: 1,206)
Robots: 1,755

Forum statistics

Threads
195,480
Posts
2,870,836
Members
156,199
Latest member
Neilr5515

Share this page

Top