Search results

  1. L

    FS Cortex and Powerwire

    sold
  2. L

    FS Cortex and Powerwire

    I have my cortex 3950 updated a week ago boxed up and ready to ship. $275 shipped within the US. I also found a powerwire in my toolbox the other day ill throw in for free. its the original powerwire my airram, not a homemade one. I always saw better WOT A/F ratios with one installed on...
  3. L

    93 octane?????

    Might be a little late chimig back in but when i was going thru this with my 06, i dataloged a few WOTs to see the differance and t was showing every sign for detination while i was running 89 on the 91 tune. I addwed a powerwire and it almost instantly fixed t with the rest of the fuel learning...
  4. L

    how do you change exterior door handles...im stuck

    your not the first to do this. ive read before someone got fed up on the first one and drilled some large holes in it to get to it with a socket and extension. i think he said 1st door took 2 hours, other 3 doors too 45 minutes combined. haha. i looked at this a few weeks ago when i did my...
  5. L

    Built me some side steps

    the location looks really good on those. when placing customs steps just take a normal approach into the truck and look down and see where you foot goes. thats where the step should be. thats how i marked mine when i built these for my 06
  6. L

    93 octane?????

    running a under octane fuel in a tuned vehicle will cause detonation and can fry your plugs and rings over time. i always go to the same station here and they only have 87 and 93. currently running 87 tune and im going to switch back and change my tune higher to regain some of this horrible...
  7. L

    Remote Start Issues

    negative, the hood sensor is mounted to the right of the hood latch and its just a black button that sticks up when the hood is opened. i had to move mine for my lights and zip tie the button down and tape it so i could still use my starter. just unplugging it disables the remote start. under...
  8. L

    show your grill

    stock chrome laramie grill..... slightly modified.
  9. L

    Wiring harnesses under dash

    Negative, I have that option and still have that open plug.
  10. L

    Wiring harnesses under dash

    with out any pics ill take a guess and say; 1. large plug with 2 pins = trailer harness for brake controller 2. smaller 2-4 pin = power pedals i believe. 3. small 6 pin = have no clue, also have this left unplugged and mine has every interior option available. i tapped one of these wires for...
  11. L

    What transfer case fluid for a 2011 sport

    they changed the T-cases in 11 to the BG case which is differant than the previous NV/NG cases. the 246 case uses a set of clutches instead of a standard chain like most tcases, this allows smoother operation while on more traction controlled surfaces such as poor weather and black ice areas...
  12. L

    Lift Descisions

    all the ESC controls are speed sensor based so yes they will work. all the companies ive seen say if you have a TRX (outdoorsman) then its best to go with there 4" to achieve the 5" total lift. just to be safe. if you installed a 6" itll go to 7" and there engineers say thats too much strain...
  13. L

    Look what I test drove today...

    2 years ago when the 4g 3500's just came to this area i test drove one, sticker price was 67k. Fully loaded quad cab long bed Laramie, only CTD they had on the lot, the salesman said it was policy that any vehicle over 60k they had to ride along on the test drive. I asked how many vehicles they...
  14. L

    Lift Descisions

    This is accurate. The outdoorsman is what used to be the TRX package. Bilstein 5100's have the 2.8" setting for the TRX shocks because they are set .7 higher than the stock regular shock housings. Normally the 5100's only go up to 2.1" but since you have the option to go higher then everyone...
  15. L

    Trying to get pictures from USB to Nav system.

    try putting a couple songs on the jumpdrive with them and see if it will let you open those up.
  16. L

    Terrible fob key

    ive never had a problem with my truck fobs but when we bought our jeep last fall we had both fobs replaced within 2 months due to them completely failing. they told me there were some fobs that weren't assembled correctly on a few cars, truck and jeeps made within a few months. either way we...
  17. L

    Best intake?

    my mistake, they are aluminum, but it still has 10x the heat sink as composite materials. aluminum can dissipate heat better than steel but can still get quite hot.
  18. L

    Warm weather mods are done

    thanks guys, im actually going to be changing the mirrors to black instead of red, i think they will blend better instead of stick out. not sure about the mirror lights. if i black then they wont put off as much light and i like them. there the only reason i dont have rock lights on this truck...
  19. L

    Warm weather mods are done

    since this year is coming to a close weather wise, lets see what you all got accomplished this year. heres mine back in febuary when i bought it. and heres how it looks now. i believe ive only got about $2000 in total mods this year. i think its changed quite a bit, ive still...
  20. L

    Behind the grill lights

    ive drunk some pitchers before :roflsquared: heres some pics i took. i hung a bar from the cross support and triangulated a support from the front to keep it from shaking from vehicle vibrations.
  21. L

    Best intake?

    The k and n stuff is where i first started noticing the heat sink factor. Your kit is rated at 10hp where as mine is the exact same design and style just in composite material instead of chrome steel and mine adds 16hp on there site for a 4g ram.
  22. L

    Side Steps OEM or Aftermarket

    thanks, its still alive and kickin, but the new owner is a punk that change alot of stuff to "name brand" cheap crap. oh well. i should have done a chop shop style tear down on that before i traded it. coulda had tons of stuff to sell.
  23. L

    Side Steps OEM or Aftermarket

    i made these steps for my 06. ive been thinking about making a set for my 09 also. they just look better IMO. and dont cost 500 like all the companies charge. if your decent with fab work then these are fairly easy to make. i wish id had a bender instead of having to chamfer all...
  24. L

    Best intake?

    looks the exact same as the K & N kit.
  25. L

    Best intake?

    yea, gotta love that "vwamp" sound when you stomp on it, then you hear the exhaust and then tires squealing. second best sound sequence in the world. the first isnt made by a vehicle. :naughty:

Latest posts

Members online

Total: 648 (members: 15, guests: 633)
Robots: 1,065

Forum statistics

Threads
195,488
Posts
2,870,944
Members
156,208
Latest member
376steve

Share this page

Top