Search results
-
Got my lift on! 4 inch zone and Bilstein 6112s set at 2 inches
@Freed127 it's an 8. I'm tuned by Jay and have some headers from arh on the way so who knows maybe I will do 37s eventually, I'm never satisfied lol. The 2500 looks sharp! @RedSRT4Me damn truck looks good! I think this is a sign I need to do a regear and 37s eventually lol. And once a year I go... -
Got my lift on! 4 inch zone and Bilstein 6112s set at 2 inches
Love it, looks like a monster. And that makes sense, it looks taller/beefier than mine for sure. I debated doing a gear swap to run 37s (only have 3.21s now and it hunts enough with the 35s) but in all likelihood I'll step-up to a 2500 in a couple years anyway. Just wanted something fun to drive... -
Got my lift on! 4 inch zone and Bilstein 6112s set at 2 inches
I've got that all done, powdercoated the hellwig swaybar, got cores panhard bar and upper and lower control arms. Swapping the hellwig endlinks for zones since I like greasable stuff -
Got my lift on! 4 inch zone and Bilstein 6112s set at 2 inches
If i remember it was about 38.5 or 39, and now the front sits around 44.5. When I was planning it out and looking at other rides with the same setup the angles varried as well since different trucks tend to sit and settle differently. If I remember right too, the top spacer on the zone lift is... -
Got my lift on! 4 inch zone and Bilstein 6112s set at 2 inches
It's because it is basically a 6. 4 inch but with the bilsteins adjusted to 2 inches adds additional lift. -
Got my lift on! 4 inch zone and Bilstein 6112s set at 2 inches
Little update with it, I've since debadged, added the alpharex luxx led headlights, and did the tow hook mod -
Got my lift on! 4 inch zone and Bilstein 6112s set at 2 inches
I paid my local window tint shop 20 bucks to do it lol. I know myself and it would more than likely end up as a ball of trash on the ground haha. They used a spray bottle with soapy water to help -
Got my lift on! 4 inch zone and Bilstein 6112s set at 2 inches
6 inches actually. 4 inch zone lift and my bilstein 6112s set to 2 inches. The rear is 4 inches, 3 from the coil and the 1 inch spacer -
Got my lift on! 4 inch zone and Bilstein 6112s set at 2 inches
Proryde. I love em. They use a cool locking system that stacks and you can pick 1, 1.5, or 2 inches. They also have a bolt that holds them in place so it guarantees no noise like some of the others -
Zone 4 inch lift plus their UCAs plus bilstein 6112s
@JB1 I know this is an old thread, but what made you drop it to a 5/3? Also, what tires were on your build when it was the 7.8/5? It looks perfect and I just ask because I'm basically going that route lol. I have the 4 inch lift now with bilsteins set to 2.8, 3 inch coil in the rear with a 1... -
Odd chirping/metallic noise around 1500rpm and 25mph plus
I know mine is nothing exhaust related, definitely something in the trans/torque converter since it is rpm based. I'll let you know what the dealer says when I take it in- FLYxxBOY
- Post #13
- Forum: Engine & Performance
-
Odd chirping/metallic noise around 1500rpm and 25mph plus
Did you ever figure out what might be causing it? I'm gonna take it back to the dealer soon since my power train warranty is almost up. It hasn't gotten worse or anything, but curiously I did notice if it's in tow haul mode it super rarely does it. This makes me think more than anything it's in...- FLYxxBOY
- Post #11
- Forum: Engine & Performance
-
Upgrading break lines
I know this thread is 4 years old, but im about to get some klm ones. Do most people only replace the front? Klm says the rears need to basically be custom done and flaired, but say they do have a kit on their site but I don't see it. I've messaged them too just waiting on a response back -
Alpharex NOVA headlights installed and review.
Thanks man! And I got the alfaobd as well thinking I would have the light out code as well but I never got anything. The 2016s, atleast mine and my buddies, have been really good about replacing to leds. I have all of my lights on my truck swapped to leds (tails, fogs, interior, license plate... -
Alpharex NOVA headlights installed and review.
I know, it just took me a minute to understand what you were saying lol and yeah they are better in person cameras don't do them justice -
Alpharex NOVA headlights installed and review.
Lmao i was gonna say. Like I said I had diode dynamics leds in my quad reflectors, and I think these are brighter -
Alpharex NOVA headlights installed and review.
Can't tell a difference between what? -
Alpharex NOVA headlights installed and review.
So I realized my whole drive in to work is basically lit up, but these are the low beams. I can try to get some better night shots when we venture out to the country -
Alpharex NOVA headlights installed and review.
Its really good, definitely lights up the night -
Alpharex NOVA headlights installed and review.
Good deal! Sounds like me but with tires lol. Got 275/65/20 Cooper stt pros when I got my level, then lifted the truck 6 months later and decided I needed 35x12.5s, so I got those and sold the 275s to recoup most of the cost lol -
Alpharex NOVA headlights installed and review.
Yes, it is pretty cool to see since I've never seen the light out that far before. My buddy as the moris, and we both agree the luxxs are better. His drls are brighter, but I think that's because mine are the alpha black and have the darker plastic. -
Alpharex NOVA headlights installed and review.
They are really good. I had the oem quads with diode dynamics sl1 leds, and these out perform them IMO. Crisp cutoff, throws light pretty far, I'm really happy with them -
AlphaRex "Luxx" Series... anyone have them? Looking for reviews.
No video, but I can try to get one tomorrow morning on my way to work. -
AlphaRex "Luxx" Series... anyone have them? Looking for reviews.
Just installed those exaxt ones today and I love them. I used to have the stock quad reflectors with diode dynamics sl1 leds which rocked, and these outperform those IMO. Cutoff is great and output is very bright, especially brights. Reading street signs with low beams takes some getting used to...
Staff online
-
GriffinSenior Member
Members online
- BucketGruntJL
- skates15
- mdc1990zr1
- PDub72
- WY-Dave
- Fritter
- Stefan N
- Neilr5515
- AZ MARK
- marine0311
- Maniac
- Lsujker
- mb33458
- Dodge 1500 4X4
- ajv00303
- Black-Wolf
- clifford15
- brendan185
- RJL1
- 6speed4.7
- TNGA
- Pittbullsean
- La Ramie
- Dean2
- northlane1
- HAWKWARLOCK
- Griffin
- smarchini
- bob49
- Choicebro
- ric221
- Dontra
- 13RAM13
- Edward Hands
- Wild one
- Curmudgeon
- 09SilverRam
- Art_in_CO
- BumbleBRam
- Nick081974
- 4thgenerationdodg
- DustyGeneral9399
- JHoward
- Motoman501