I’m trying to install a hood latch sensor and I’m struggling with pin outs to correctly locate pin 11 on this connector. I’ve located several conflicting sources for this. Can someone please post the accurate pinout for this connector? Thanks in advance!
Sent from my iPhone using Tapatalk
Thanks, was the mayhem in the front and the HD for the rear. Their quality is very good. One thing to keep in mind it they one piece with the brackets which makes them very strong but is a pain for the front since you need to suspend it in the air the entire time. I used a hoist. The rear is...
Give a serious look at ThrottleDownKustoms.com. They did both bumpers on my 3500 and doesn’t effect the hitch at all.
Sent from my iPhone using Tapatalk
Thanks. Took a bit to get it right (see my post on the plow mount) but glad we are finally there. My advice to anyone thinking about putting on bumper that weighs 250# is to invest in a hoist, saved my back on this project.
Sent from my iPhone using Tapatalk
So an update to this. Throttle Down Kustoms made good on all. We needed to get the bumper recut and re powder coated of which they covered half the cost to have it done locally. I was fine with that since it would of cost me that to send it back to them. One note of caution however. If you...
Only thing you need to be careful of is with the diesel models. Plenty of room for a winch on a 2500-3500 hemi. Here is a pick of mine with a TDK bumper with a winch (behind the flip up license plate).
Sent from my iPhone using Tapatalk
If this is the wrong place to ask please let me know. I have a 2020 3500 tradesman. Most of the winter I have a tailgate sander that blocks the rear camera in the tailgate. I’d like to find someway to tap into the factory harness somewhere and get a second camera (I’d just buy a mopar one...
I have the RamBox for my 2020 3500. One of the main reasons I went with Ram. Great functionality. I even bought the divider kit. Didn’t get the MFT as it wasn’t available when I ordered mine.
Sent from my iPhone using Tapatalk
I have a thread on a hidden mount here I was building on. Basically this only works with the gas models because of the intercooler being in the way on diesels. Now there could be an easy way to relocate that. Just not familiar.
Sent from my iPhone using Tapatalk
Update: they are working with me to have the modifications done locally to make this work. I’ll post some updated pics when we get it back from the shop.
Sent from my iPhone using Tapatalk
Yeah I have a Tradesman so no sensor holes needed. Was an option though. They did miss the license plate bracket though so that was surprising.
Sent from my iPhone using Tapatalk
Yes I wanted to have everything lol. Unfortunately only found 1 manufacturer that was willing to put one together, waited 6 weeks to get it, spent all day yesterday trying to get it to fit......no way. I figured it wouldn’t be easy but this was very disappointing.
Ordered a custom front...
Noticed something odd today about one of the RamBox covers, the plastic painted part is basically sliding off the underside. I can force it back on but it keeps coming off. Anyone else have this happen?
Sent from my iPhone using Tapatalk
This is awesome work you guys do, you are fulfilling some big holes left by Ram in their options. I’m trying to find a way to tap into my backup camera wiring in my 2020 3500 Tradesman when I use my tailgate sander in the winter since it’s blocked when that thing is on.
Sent from my iPhone...
Most of them can be mounted feet forward like this. The bumper I’m looking at has the same standard 4 hole mount. You’ll likely need to relocate the relay box to a more accessible location in most cases. If you find a different solution please do let everybody know.
Sent from my iPhone...
Should be the default right ? Well not on mine. Through some assistance here and experimenting I got it switched though.
Sent from my iPhone using Tapatalk
Well that was it, took out the three blade and put the two blade micro 2 one in and that was the trick. I’ll be calling them Monday but I’m assuming it was for the controller. Why a 3 blade 15amp when the factory specifically asked for a 20 is what baffles me still. Thanks for everyone’s...
It definitely does on mine. It’s dead if I pull it. I’m wondering if I stick a micro in either side if that’s the select ?
Sent from my iPhone using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.