Search results

  1. A

    P0440 / P0455 evap saga concludes

    Very easy. I gave myself a few days days to spray the bolts with penetrating oil to make sure it was a breeze. There is 6 18mm bolts holding the bed on. They are large and most likely can’t snap off but you might strip the threads on the bed if it’s rusty so I sprayed them once a day for 3 days...
  2. A

    P0440 / P0455 evap saga concludes

    There are a few threads out there already but I wanted to make a quick searchable solution for anyone battling the dreaded, elusive, evap p0440. For the past 2 years I’ve replaced evap parts here and there to find the leak. Sometimes I received “very small” or “very large” leak detected codes...
  3. A

    Evap leak traced to above the tank. Ideas and suggestions? 2008 5.7 BHorn

    I found the issue but haven’t been able to update you guys until now. The fuel pump was very cracked and corroded under the retaining ring. Sent from my iPhone using Tapatalk
  4. A

    Evap leak traced to above the tank. Ideas and suggestions? 2008 5.7 BHorn

    Thank you! That’s exactly what I was wondering, if I could just lift one side and have enough room. Sent from my iPhone using Tapatalk
  5. A

    P0455 Large EVAP Leak

    Unfortunately it’s not that easy of a fix. I replaced the ldp pump easily on the side of the charcoal filter already. The leak is coming from somewhere around the fuel pump locations atop the tank. Sent from my iPhone using Tapatalk
  6. A

    Evap leak traced to above the tank. Ideas and suggestions? 2008 5.7 BHorn

    Hi all, I just made a evap smoke machine to track down my dreaded “gascap” and engine light that’s been in for 2 years (replaced all the evap components with no positive results). My leak is coming from above the tank. I still can’t pinpoint where but now I know the the tank must be dropped...
  7. A

    P0455 Large EVAP Leak

    I just made a homemade evap smoke machine and my leak is coming from above the tank. I still can’t pinpoint where but now I know the the tank must be dropped unless anyone has any ideas for me? It is clearly not a line, connector or the filler tube. I just learned that there are covers over the...
  8. A

    Water under the rear seat

    The water is pooling in the storage basins. The basins hold the water and it does not leak under into the metal body of the truck. So it’s not the rear vents. I stripped the truck rear seat area down to the metal last week and pressure washed the rear of the truck until I found the water comes...
  9. A

    Anyone put subs -behind- the rear seat (QuadCab)?

    I wish I could put a sub setup on one side but I can’t stop the water from filling the rear storage compartments. Even after doing a 3rd brake light seal and clearing the rear window channel drain plugs. Sent from my iPhone using Tapatalk
  10. A

    Anyone used these kicker speakers?

    These speakers are great. Sent from my iPhone using Tapatalk
  11. A

    Rear power slider

    Does this conversion let less water in the weather seals? Sent from my iPhone using Tapatalk
  12. A

    Common "small evap leak" code and reason?

    I’ve replaced all the above. Looks like it’s time to move on to the smoke test. Sent from my iPhone using Tapatalk
  13. A

    Tire Recommendations

    Those are nice. Need new tires myself. Sent from my iPhone using Tapatalk
  14. A

    Blower motor won't work on second speed

    Replaced the resistor and mine still doesn’t work. Sent from my iPhone using Tapatalk
  15. A

    Water under the rear seat

    I had to unclog the holes for the rear window drain tubes and seal the 3rd brake light and that did not stop the leaks. I think the water comes through the rear window seal too fast. Poor design. Sent from my iPhone using Tapatalk

Latest posts

Members online

Total: 676 (members: 38, guests: 638)
Robots: 1,106

Forum statistics

Threads
195,587
Posts
2,872,146
Members
156,367
Latest member
firedh

Share this page

Top