Dad's 1990 Ram
Junior Member
- Joined
- Aug 3, 2010
- Posts
- 6
- Reaction score
- 0
- Location
- Kanabec County Minnesota
- Ram Year
- 1990
- Engine
- 318ci V8
My '03 2500 is a regular cab, long box. I've been towing a camper trailer and a tilt-bed car trailer and everything was working great.
The last time I towed my camper trailer I had no left turn signal on the trailer but the left turn signal on the front and back of the truck worked as they should.
There was no flashing using a test light at the left turn signal pin in the 7 pin receptacle.
I checked the wiring from the left turn pin on the 7 pin receptacle to where they wire is inside the loom above the rear axle.
The inspection was visual and using a multi-meter.
The wire, (yellow with a red tracer), checks out good to that point.
Without digging through the loom all the way to the front, testing as I go, can anyone tell me where it goes so I can start at that end?
The last time I towed my camper trailer I had no left turn signal on the trailer but the left turn signal on the front and back of the truck worked as they should.
There was no flashing using a test light at the left turn signal pin in the 7 pin receptacle.
I checked the wiring from the left turn pin on the 7 pin receptacle to where they wire is inside the loom above the rear axle.
The inspection was visual and using a multi-meter.
The wire, (yellow with a red tracer), checks out good to that point.
Without digging through the loom all the way to the front, testing as I go, can anyone tell me where it goes so I can start at that end?