10 Second 4th Gen Hemi Ram - FINALLY!!

[Hemi450hp]

Congratulations Matt, that is just frikkin awsome!!
10 seconds and kicking a Hellcat ass off the line is SERIOUSLY impressive!
You have a badass truck for sure!
What suspension/lowering setup are you running?
Once again, congratz, you have a truly great Ram!!

Thank you. This truck has the Inez 4/6 kit, but with Illicit cut brackets in the back. I'm running Viking double adjustable shocks front and rear, Core 4x4 adjustable rear control arms, Hellwig rear swaybar, and Spohn adjustable panhard bar.

 

[HammerHead]

Best I've seen

 

[RedSRT4Me]

Are the 3.21 gears in this truck or a different ratio?

 

[Hemi450hp]

Are the 3.21 gears in this truck or a different ratio?

Ran a 6.91 @ 102.83MPH in the 1/8th last Sunday on 3.55 gears, but without the 25mph headwind that we had on the 10.95 pass. The truck currently has 3.21's in it, so I am going back to the 1/8th mile this Sunday in better weather to see if I lost anything by stepping down to the 3.21's. If so, then I will put the 3.55's back in.

 

[RedSRT4Me]

Ran a 6.91 @ 102.83MPH in the 1/8th last Sunday on 3.55 gears, but without the 25mph headwind that we had on the 10.95 pass. The truck currently has 3.21's in it, so I am going back to the 1/8th mile this Sunday in better weather to see if I lost anything by stepping down to the 3.21's. If so, then I will put the 3.55's back in.

Right on! Good luck this weekend.

 

[likes2build]

3.21 rears, what's the RPM's through the traps? Your truck is BEYOND AWESOME!!!!!
Congratulations

 

[Hemi450hp]

3.21 rears, what's the RPM's through the traps? Your truck is BEYOND AWESOME!!!!!
Congratulations

To be honest, I did not log this pass, so I dont know. I am new to HP Tuners and honestly am not a fan of it so far. Their logging is a lot more complicated for me than it was with Diablo, so I didnt even bother with it on that pass. I will get some logs in the 1/8th this Sunday though to compare them to the 6.91 pass that I logged last week.

 

[theviking]

To be honest, I did not log this pass, so I dont know. I am new to HP Tuners and honestly am not a fan of it so far. Their logging is a lot more complicated for me than it was with Diablo, so I didnt even bother with it on that pass. I will get some logs in the 1/8th this Sunday though to compare them to the 6.91 pass that I logged last week.

Congrats Matt!!! Curious, do you see more parameters available with the HPTuner? I always here they have better tunability than Diablosport but never did confirm.

 

[kkreit01]

Wow! Congrats. Nice job!

 

[Hemi450hp]

Congrats Matt!!! Curious, do you see more parameters available with the HPTuner? I always here they have better tunability than Diablosport but never did confirm.

I'm no tuner, so I cant really comment on that part. As an end user, Diablo was much easier for me to use. I do have a spare PCM here that I may use to switch back to Diablo in the future.

 

[Pistol]

Glad I found this post. I was curious about the Core 4x4 control arms. If they are holding up to 10 second passes they should more than work for my use. Congratulations on the progress with your truck.

 

[S0CAL]

I finally got a chance to run the 1/4 mile in the Whipple supercharged 2014 Ram yesterday, and my 1 and only pass was a 10.95 @ 125.63mph. Very happy to finally get a 10 second slip, but I'm even more excited about how much more we have left in it once dialed in. To keep this short, the truck is a 2014 with a MMX 422" and a 2.9L Whipple. We are running 12psi and on e85. This was run in 100% street trim aside from a drag radial in the rear...even kept the sub box and amp in the cab as well. Anyways, here is a quick video of the run...got to line up next to a modified Demon, so that in itself was fun.

Just

 

[boostking101]

Congrats Matt!!! My Hemifever tune on my 18 feels great! Thanks again for the help!


Sent from my iPhone using Tapatalk

 

[Boosted Motorsports]

Awesome man congrats! What susp setup are you running?

 

[Hemi450hp]

Awesome man congrats! What susp setup are you running?

Thank you. The truck has the Inez Hotrods 4/6 lowering kit with cut rear Belltech Springs. I'm running Viking double adjustable shocks, Core4x4 rear control arms, Illicit Customs cut control arm relocation brackets, Spohn adjustable panhard bar, and Hellwig rear swaybar.

 

[curtis l parker]

Congrats Matt iam looking forward to seeing what the truck does once you get everything dialed in.

Thanks for your advice and help
Curtis

PS
Plan to have my SuperCharger installed in Feb

i attached a pic of my 2012

 

[2010 Infantry Vet]

Thank you. The truck has the Inez Hotrods 4/6 lowering kit with cut rear Belltech Springs. I'm running Viking double adjustable shocks, Core4x4 rear control arms, Illicit Customs cut control arm relocation brackets, Spohn adjustable panhard bar, and Hellwig rear swaybar.

I ran these Metco billet aluminum upper and lower adj control arms in my twin turbo mustang. They fixed my traction problems running 820 RWHP. They are suppose to start making arms for our rams.

 

[crackerjack1957]

Core 4x4 control arms are huge......cannot see it any better for the Rams....unless you want to shed some weight.....lol

 

[Pull Ya]

They are a little "hefty"-----LOL
Jay

 

[2010 Infantry Vet]

Core 4x4 control arms are huge......cannot see it any better for the Rams....unless you want to shed some weight.....lol

Yeah the metco are billet aluminum, and just as strong. And they use better bearings than core. How much is a core set?