Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Status
Not open for further replies.

Gixxer750

Senior Member
Joined
Jan 10, 2020
Posts
368
Reaction score
141
Location
N. Idaho
Ram Year
2015_2017
Engine
Hemi 5.7
SOLD. - SOLD. - SOLD - SOLD - SOLD - SOLD

Driver door Master window switch bank. - never installed-
W/ power folding mirrors, power mirrors, including tow, front auto up/down switches, window lock out and vehicle lock/unlock....is a 2 connector 3+9 pin. Fits 2013-2015 1500,2500,3500 part 68212784AB.

Clustet dust cover SOLD
Switch bank SOLD

1596309219020247993797991086897.jpg

15963092419916859716743703673514.jpg

1596309262595491335857920815127.jpg

15963092811761385913336384758366.jpg

15963093105067275154659092610851.jpg
 
Last edited:

StoneDude76

Senior Member
Joined
Dec 17, 2014
Posts
706
Reaction score
265
Location
West Chester,PA
Ram Year
2014
Engine
5.7 HEMI
Bump for Gixxer750. Received the Quick Lift struts arrived today. Look good. Now I have to find time to put them on. To all the members this is a good guy to buy from.


Sent from my VS988 using Tapatalk
 
OP
OP
Gixxer750

Gixxer750

Senior Member
Joined
Jan 10, 2020
Posts
368
Reaction score
141
Location
N. Idaho
Ram Year
2015_2017
Engine
Hemi 5.7
Word of advice for breaking loose the lower ball joint for the knuckle. There is a flat spot that looks cross hatched, remove all nuts but the upper control arm, remove all other linkage , sway bar arms, axle, etc, then take a 2lb sledge if not full size and beat that flat spot on the lower control arm like it owes you money. Torque for hub nut is 280 ft/lbs + something like 270° if i remember correctly. It was difficult to find at the time. And all other ball joints just slam with the ¹/2" airgun to tight, not ridiculous. And use thread lock as the oem original nylon lock nuts are not reliable when reused (mprobanly a myth). Took me 2hrs for the first and an 1hr for the 2nd. With a nap in between cause it was hot as He**. Enjoy. If you decide to ramp up your tow capacity with those HD coil bags let me know and maybe a we can work out the compressor and remote unit
 

Armkb

Member
Joined
Jul 27, 2020
Posts
30
Reaction score
19
Location
Stormville New York
Ram Year
2016
Engine
Hemi 5.7
Master switch still available? Title says it fits a 2016 but in post you say up to 2015. I have a 2016 and am looking to install power folding mirrors.
 
OP
OP
Gixxer750

Gixxer750

Senior Member
Joined
Jan 10, 2020
Posts
368
Reaction score
141
Location
N. Idaho
Ram Year
2015_2017
Engine
Hemi 5.7
Easy check is to pop yours up and see if there is one or 2 connectors. If you have 2 this is your switch. It was one of those mid year changes on some models...
 

Sdpadrez

Senior Member
Joined
Jan 14, 2020
Posts
337
Reaction score
124
Location
Arizona
Ram Year
2015
Engine
5.7
Easy check is to pop yours up and see if there is one or 2 connectors. If you have 2 this is your switch. It was one of those mid year changes on some models...
This is not exactly correct. If you have manual mirrors. The power folding will not work. You can enable options like puddle lights, turn signals(if the mirrors are equipped with them) and it will work. But you need an updated module for power folding to work
 
OP
OP
Gixxer750

Gixxer750

Senior Member
Joined
Jan 10, 2020
Posts
368
Reaction score
141
Location
N. Idaho
Ram Year
2015_2017
Engine
Hemi 5.7
This is not exactly correct. If you have manual mirrors. The power folding will not work. You can enable options like puddle lights, turn signals(if the mirrors are equipped with them) and it will work. But you need an updated module for power folding to work
Yes, I am only supplying the button. A switch is just a switch. The wiring and pinouts at the module and mirror are up to the buyer. However. The 6 3 pin config works for non power fold also. Memory mirrors i can not speak to.
 
OP
OP
Gixxer750

Gixxer750

Senior Member
Joined
Jan 10, 2020
Posts
368
Reaction score
141
Location
N. Idaho
Ram Year
2015_2017
Engine
Hemi 5.7
Yes, I am only supplying the button. A switch is just a switch. The wiring and pinouts at the module and mirror are up to the buyer. However. The 6 3 pin config works for non power fold also. Memory mirrors i can not speak to.
So you are correct the module determines what will be preformed via you specific module and pin out. But i bought after market power fold tow mirrors that worked exactly as they should with this. Just had to rig 2 pins and some wiring
 

DERJ

Senior Member
Joined
Mar 14, 2014
Posts
290
Reaction score
180
Location
Austin
Ram Year
2014 R/T
Engine
Hemi 5.7
I’ll take the door switch...
 
Status
Not open for further replies.

Latest posts

Forum statistics

Threads
194,925
Posts
2,864,173
Members
155,296
Latest member
VLG6963
Top