2 inch or 2.5 inch

[jknappen]

I have seen a lot of people using 2.5 inch leveling kits and some using 2 inch leveling kits. Which one actually levels out the truck? I had a silverado that 2 inch leveled it out perfect. This is my first Ram and am not sure which one I would rather have the front down a little rather than have the front higher than the rear. Also how does the rough country that is 2.5 in the front and 1.75 in the back that almost seems counter productive to leveling

 

[DIRTRIDER]

I went with a 2" level kit and it performed as advertised and gave me the 2". I now have the rear sitting 1" higher in the back which is perfect for me, slight rake if I load something in the bed.

 

[Cherenkovblu3]

These are the only pictures I have right now of my truck on level ground. Its got a Hell Bent Steel 2" level up front. Sittin on 295/70R18 Nitto TGs, sits almost perfectly level with just enough rake to keep it from sitting nose high with weight in the bed.

 

[jknappen]

I am looking to level the front up and then do a body lift it only about 1.25-1.5 inches.

I know there are tons of set ups out there and I like the rough country set up which comes with both the level and the body lift (Rough Country 352 3 75" Suspension Body Lift Combo Kit | eBay) Just wondering if anyone has has had experience with the rough country set up. And I'm not set on the lift sizes I know I dont want bigfoot here just something a little taller is all.