2006 Ram 1500 No start

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jws123

Senior Member
Joined
May 16, 2018
Posts
2,046
Reaction score
1,951
Location
nj
Ram Year
2014
Engine
5.7
Picked up a 2006 ram 1500 4.7 150k 2 door 2wd lowest model crank windows ect. It does not start it was very low on oil almost none in it they said it just died on them turns over and sounds fine but doesnt even try to start good fuel pressure to rail. I plugged in my scanner and here are the codes i get.


Transmission control system Mil
u110z Lost communication with SCM steering control module can-c.
u0114 lost communication with Final drive control module.
u0ff4 u0ff3 u0ff2 refer to manual

Clearly some electrical issues going on here will any of these make it not run? All suggestions appreciated going to start tracing wires connectors ect I already checked fuses
 
OP
OP
jws123

jws123

Senior Member
Joined
May 16, 2018
Posts
2,046
Reaction score
1,951
Location
nj
Ram Year
2014
Engine
5.7
Truck runs on starting fluid injectors are not getting pulse?
 
OP
OP
jws123

jws123

Senior Member
Joined
May 16, 2018
Posts
2,046
Reaction score
1,951
Location
nj
Ram Year
2014
Engine
5.7
20220623_124203.jpg
Found this disaster under the dash... looks like someone tried to maybe put a auto start and some other **** half assed.
 
OP
OP
jws123

jws123

Senior Member
Joined
May 16, 2018
Posts
2,046
Reaction score
1,951
Location
nj
Ram Year
2014
Engine
5.7
Got it running found 1 blown fuse I missed the motor is shot tho still have some codes for SCM and final drive will have to deal with it after I swap motor its a mess under the dash.
 
Top