Wild one
Senior Member
- Joined
- Jan 17, 2016
- Posts
- 13,939
- Reaction score
- 23,943
- Ram Year
- 14 Sport
- Engine
- 5.7
Can they sleeve either block to save it Ian .AMS Called me today . Both my blocks are cracked , 1 set of heads is trashed as well.
FML
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Can they sleeve either block to save it Ian .AMS Called me today . Both my blocks are cracked , 1 set of heads is trashed as well.
FML
One is getting Magnaflux tested. Hoping they can save it.Can they sleeve either block to save it Ian .
Wait, you found a 6.4L for $200?!?Well After a 5 Hour round trip I now Have a 6.4L to tear into tommorow and send off to https://amsengines.com/
Not bad for 200$
Doesn't matter now.Wait, you found a 6.4L for $200?!?
I got a dollarFinally a 6.4L to bid on https://ca.iaai.com/Vehicles/VehicleDetails?itemid=1875140&t=1672329398460
Mmx?nope, But Im getting 8K in severance pay in 3 months so Ill just order a 392 short block
Problem solved
Mmx?
Send me a message, I’ve got a 2013 5.7 engine low miles. May be able to work out a deal.Just to throw it out there, I have a 6.4 I may be willing to part with. It’s torn down now with the crank at the machine shop from a bearing issues in the #8 rod and very back main. Still working with the shop to see what the issue was.
My son starts driving next year and wants the truck but I refuse to give him a built 6.4 as a teenager. More than likely going to put a 5.7 in it if I can find one.
It’s a 2014 car 392
Diamond pistons
Molnar power adder rods
Tool steel wrist pins
Melling high volume oil pump
Cam Motion custom cam
228/236 .610/.602 113+3
Hellcat lifters/pushrods
PAC valve springs
Honestly don’t have a price in my head right now but it will definitely go up once it’s put back together. Swapping for a 5.7 plus some cash would definitely be an option also.
Unless things have changed in the last month or two,you don't want the trans Ian,as so far nobodies been able to make the 8HP75 work in a transplant,a few guys have tried .Going to look at this https://www.facebook.com/marketplace/item/3339955132999218
Hoping to get engine and trans.
Just got a 6K tax bill. Talk about a kick in the nutz **** this communist ********.
Once again 6.4L swap on hold.
There's a guy selling a 6.4 over on Berta Rams Ian.I know nothing about it,other then what he's posted.Going to look at this https://www.facebook.com/marketplace/item/3339955132999218
Hoping to get engine and trans.
There's a guy selling a 6.4 over on Berta Rams Ian