2012 Ram switch to power / heated seats

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

GKrabbe

Junior Member
Joined
Apr 8, 2018
Posts
20
Reaction score
9
Location
Seattle
Ram Year
2012
Engine
5.7 H
I am working to switch out manual seats in a 2012 Ram 1500, 4x4 to power, heated and cooled seats. The part numbers on the heat controller (5026630AK) on the new seats indicate they are from between 2009 and 2012. I have spent a bit of time reviewing wiring diagrams, and was about to start making a new harness myself, but if you have this figured out already, I would be happy to purchase the necessary harness etc. Please let me know if this possible.

Thanks.
 

DeereGuy

Senior Member
Preferred Vendor
Supporting Member
Joined
Nov 9, 2016
Posts
623
Reaction score
577
Location
Pittsburgh, PA
Ram Year
2016
Engine
6.7 Cummins
I am working to switch out manual seats in a 2012 Ram 1500, 4x4 to power, heated and cooled seats. The part numbers on the heat controller (5026630AK) on the new seats indicate they are from between 2009 and 2012. I have spent a bit of time reviewing wiring diagrams, and was about to start making a new harness myself, but if you have this figured out already, I would be happy to purchase the necessary harness etc. Please let me know if this possible.

Thanks.

Just replied to your PM.
 
OP
OP
G

GKrabbe

Junior Member
Joined
Apr 8, 2018
Posts
20
Reaction score
9
Location
Seattle
Ram Year
2012
Engine
5.7 H
Hi DeerGuy,

Taking you up on your offer, it looks like I will need 3 connectors:
Two (2) 7283-6447-40 (male)
one (1) 7283-6388-40 (male)

and the wire ends needed to fix the wires into these connectors. Do you have these? I have found them online, but only 10 at a time.

Thanks.
 
Top