Beatewithaheater
Junior Member
Little to no heat and pressure on driver side, full heat and pressure on passenger side.
When turned to AC, both driver and passenger have full AC and pressure.
-Replaced thermostat with a 203 temp
-Temp going into heater core 195
-Temp coming out heater core 189
-Drain and filled the coolant with both upper and lower hoses (didn't have time or tools to do a full flush)
-After 20 minutes of running truck is at 163 operating temps
-Takes 30+ minutes of sitting to reach 203
-Checked the actuator door in front and works, can't seem to find the apparent second one.
When turned to AC, both driver and passenger have full AC and pressure.
-Replaced thermostat with a 203 temp
-Temp going into heater core 195
-Temp coming out heater core 189
-Drain and filled the coolant with both upper and lower hoses (didn't have time or tools to do a full flush)
-After 20 minutes of running truck is at 163 operating temps
-Takes 30+ minutes of sitting to reach 203
-Checked the actuator door in front and works, can't seem to find the apparent second one.