2013 Ram Alfa OBD

[MrCrtr0591]

Recently started making changes with obd. Set all my lights to led and getting turn signal out notifications. hyper flash in tow mirrors. Not sure how to get rid of it. Also set door lock switch signal use to analog ajar for both doors. Passenger door works fine. It opens without the window dropping a couple inches and the cargo lights come on. The driver side is a different story. I have to set the door lock switch signal to be for the door lock itself instead of analog. If I set it to analog and open the driver door, the window drops down some and the puddle lights nor the dome lights come on. I’m at a loss and don’t know what to do. Can’t find anything in the threads about it.

 

[Jeepwalker]

Was everything working properly before the obd changes? (to eliminate the possibility of shorts in the door wiring, etc)

 

[MrCrtr0591]

Ya it was. Turn signal on mirror didn’t hyper flash before but it is now. Also have the parking light out error and all turn signal bulb out errors. All the bulbs work. All turn signals flash correctly on front and rear but still getting bulb out warnings. The only errors I’m not getting are the high beams and low beams and brake out error. It says there is a short in the side marker lights and turn signals and tow mirrors. Thank you for replying.

 

[chopperman1]

Use your backp copy you made before any changes to make a list of what's changed. I use a program called Beyond Compare to compare the files. Shows you exactly what's changed.

 

[MrCrtr0591]

I have the original changes file made through google drive and have changed everything back to how it was before I started and my truck is still acting up.

 

[MrCrtr0591]

Thank you for the reply

 

[MrCrtr0591]

I’m having problems with the door lock switch signal usage. I changed the driver and passenger door lock signal usage to analog door ajar. The passenger door opens fine and dome lights and puddle lights come. When I open the driver side the lights only come on if I set the driver door lock signal usage to analog like it was stock, the window drops an inch. Not having this problem with the passenger door. If I set it to the door lock setting for the drivers side door lock signal usage, the window doesn’t drop but the dome and puddle lights don’t come on.

 

[MrCrtr0591]

This is what I have set. If the drivers door is open the lights only come on but the drivers door window drops an inch or so