2014 1500 5.7 Hemi Ignition coil and spark plugs help ASAP

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Hattan

Member
Joined
Oct 23, 2021
Posts
70
Reaction score
22
Location
45701
Ram Year
2014
Engine
5.7 hemi
Hi, I am new to this forum and owning a Ram. I found Rockauto to be more reasonably priced in comparison to O'Reilly's, Advance and etc. I would like to get recommend the correct OEM Coils and Spark plugs to order off Rockauto. I get confused reading other forums and I'd appreciate getting opinions from people more experienced than I am. I need to replace them asap before I get busy driving to school and work. Thank you!
 

BadHemi2014

Senior Member
Supporting Member
Joined
Feb 7, 2020
Posts
826
Reaction score
1,437
Location
Greater Cincinnati area
Ram Year
2014
Engine
5.7 Hemi
^^What he said.

I will also add that your coils are probably fine unless you know there's a problem with them.

And an indispensable tool, makes the job WAY easier:

Gearwrench
 
OP
OP
H

Hattan

Member
Joined
Oct 23, 2021
Posts
70
Reaction score
22
Location
45701
Ram Year
2014
Engine
5.7 hemi
^^What he said.

I will also add that your coils are probably fine unless you know there's a problem with them.

And an indispensable tool, makes the job WAY easier:

Gearwrench
Yes the coils are good I just have one that went bad and I'm replacing it. I just ordered that tool last night lol.
 
OP
OP
H

Hattan

Member
Joined
Oct 23, 2021
Posts
70
Reaction score
22
Location
45701
Ram Year
2014
Engine
5.7 hemi
image0 (9) copy.jpeg
can someone please send me a link to a replacement for this from rock auto? I'm not sure what is it called exactly but I think it's a stabilizer bar end link at the front passenger side. Thank you.
 

crackerjack1957

Senior Member
Joined
Sep 26, 2015
Posts
2,015
Reaction score
2,377
Ram Year
2014 Sport 1500 CC 4x4
Engine
Hemi 5.7...65RFE...4.56
Thank you for the quick and direct response. I got last questions for you, do I need to gap them or they are gapped correctly from the manufacturer? and do I need anti-seize or anything like that mentioned on other forums?
No anti seize recommended.......always check gap even though they are preset

 

crackerjack1957

Senior Member
Joined
Sep 26, 2015
Posts
2,015
Reaction score
2,377
Ram Year
2014 Sport 1500 CC 4x4
Engine
Hemi 5.7...65RFE...4.56

crackerjack1957

Senior Member
Joined
Sep 26, 2015
Posts
2,015
Reaction score
2,377
Ram Year
2014 Sport 1500 CC 4x4
Engine
Hemi 5.7...65RFE...4.56
Should also replace bushings in stabilizer bar but they make 2 different sizes

Put your vin# in the link below & check vehicle options that describe your Ram for correct bushings then copy & paste that number to Rockauto

 
OP
OP
H

Hattan

Member
Joined
Oct 23, 2021
Posts
70
Reaction score
22
Location
45701
Ram Year
2014
Engine
5.7 hemi
Should also replace bushings in stabilizer bar but they make 2 different sizes

Put your vin# in the link below & check vehicle options that describe your Ram for correct bushings then copy & paste that number to Rockauto

You should replace both sides........below is correct # if you have no lift......made for factory specs

I already placed my order with one stabilizer bar and trying to see if I can change it to two instead so far no luck. What happens if I do not change the bushings?
 
Top