2014 RAM 1500 Express Crew Cab

Yep. 2 per side and as kid indicted as long as you don't exceed 55w per side.
Also remember to set the fogs as leds

Enable Fog light leds
Select vehicle, body computer, 2013-2017 body computer
Then active diagnostics
select procedure Car configuarion change (should be all the way down to the list)
CBC Features-LED Front Fog Lamps present - Set to Yes, default should be no
Finish

 

No relays needed ? And if so can I use one of these ? And where would I hook it up to the oem fog light switch so that the relay and fuse are connected so that it triggers the relay?

 

If you do what ram1500 said then you don’t need a relay. You would just hard wire to the factory fog light harness. That’s how mine are. Either cut the factory connector off and splice in the new deutsch connectors or make an adapter harness.

 

Got it ! thank you !

 

Correct you can use your fog factory harness. Some of the fogs/pods already come with the DT connectors, use the adapters you posted here https://www.ramforum.com/posts/2366765/ and wiring 4 fogs or pods with DT connectors should be all plug and play. Just make sure not to exceed 55w per side.

 

Sweet ty

Sent from my SM-T387V using Tapatalk

 

Working with Nick to get a set of Icon DT UCA's. Nothing wrong with the Zones i just want a set of UCA's that will allow me to use all the travel in my King coilovers and i want to try to the Delta Joints from Icon. Never had them before so there is always a first one for everything

 

And i just ordered the Icon DT UCA's. Thanks a lot, Nick. Will do a side by side comparison with the Zones once i get them in. I should have done the same with the stockers. Oh well, I'll have the Zones for sale soon.

 

My only concern and the reason I didn’t buy the Icons is because of the maintenance on them. I like how the zone are still fully sealed.

 

I wanted to do Total Chaos with uniballs or new Camburg 1.25 uniballs. Nick don't carry the TC's and the guys from Camburg didn't even replied back to an email I sent them,i guess they didn't like I asked for a discount promising to give them a review in our forum considering perhaps I was going to be one of the first members with such UCAs oh well. Their lost. My money went to Icon.

Ive had uniballs before so I know what they're and what to expect from them. The DT stuff will be new to me and theyre supposed to be the best of both worlds, uniball toughness with BJ longevity. Will see...