DavidRussell
Junior Member
Ive got front and rear bilstein 5100s.
PN: BIL24-187367 and PN: BIL24-187374
Also have Daystar 1" Rear coil spacer.
PN: KC09116BK
Up front. I can use the Bilstein with it being set to 2.1" lift with the stock coil. Nothing else needed? I am not setting 2.8" to avoid replacing the upper control arm.
In back.. This will make it so I can lift the rear 1" without changing coils right? Or am I mistaken here?
Also, do I need to do anything with bump stop?Need to do anything with break lines or Sway bar? Am I missing anything at all?
Sorry for all the questions I just don't want any surprises.
PN: BIL24-187367 and PN: BIL24-187374
Also have Daystar 1" Rear coil spacer.
PN: KC09116BK
Up front. I can use the Bilstein with it being set to 2.1" lift with the stock coil. Nothing else needed? I am not setting 2.8" to avoid replacing the upper control arm.
In back.. This will make it so I can lift the rear 1" without changing coils right? Or am I mistaken here?
Also, do I need to do anything with bump stop?Need to do anything with break lines or Sway bar? Am I missing anything at all?
Sorry for all the questions I just don't want any surprises.