325/60r20

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Rambojoe

Member
Joined
Jun 26, 2018
Posts
91
Reaction score
48
Location
Indiana
Ram Year
2016
Engine
Hemi 6.4
I’m running the Grappler G2s on stock 20s in their 35x11.5x20, no rub. I’ll but the 325s will rub and as said you really need a wider rim

upload_2019-4-7_8-13-21.jpeg

upload_2019-4-7_8-13-21.png
 

CoderX

Junior Member
Joined
Jun 21, 2022
Posts
1
Reaction score
0
Location
Howell, MI
Ram Year
2014
Engine
5.7L Hemi
A little late to the party, but I had 325s on my stock 20x9 rims (35" tires, with a 3" suspension lift, and 1/2" spacers) they fit pretty well unless I was locked one way or the other - then they would rub a little. I have recently purchased some 20x10s with a -18mm offset (w/o the spacers) and they are now rubbing the wheel well at about 1/2 - 3/4 full turn. We are currently looking to see what we can do about that (may have to add the spacers back on, and possibly grind about 3-4mm of body panel away) to give me full turn capability. I have no intention of removing those tires as they look pretty good on the truck. I will post pictures if anyone is still following this post.
 
Top