35's or 37's ?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BOWERSFJ

Senior Member
Joined
Apr 29, 2014
Posts
2,713
Reaction score
3,237
Location
Uniontown OH
Ram Year
2012
Engine
5.7L Hemi
Correct ... No problems, just annoying ... Annoying that it shifts too much ... Annoying that I didn't pay the extra $35 to get the 3.92's ... Tow/Haul (best), or Manual Shift (better), to knock out the Eco Mode makes it way more city friendly to drive


Sent from my iPhone using Tapatalk
 
OP
OP
V

VanCityRob

Member
Joined
Jun 3, 2015
Posts
59
Reaction score
8
Ram Year
2012
Engine
Hemi 5.7
well if or when I get 37's I'll be sure to change to 3.92s than
 

gassersarentdead

Senior Member
Joined
May 25, 2015
Posts
1,553
Reaction score
657
Location
ohio
Ram Year
2012
Engine
5.7 hemi
I have 3.55's and 37s and it's fine. I have the zone 6"/5"rear and bilsteins maxed. With a 0 offset wheel and 1.5" boras I had to trim a good bit. I'd be surprised if you could get them to work without bilsteins. Bad thing is you went with the 3" rear so if you add bilsteins up front you're gonna have to raise the rear.
 
OP
OP
V

VanCityRob

Member
Joined
Jun 3, 2015
Posts
59
Reaction score
8
Ram Year
2012
Engine
Hemi 5.7
Yeah I was unaware at the time, I just didn't want any rake. If I had known about bilsteins before I would have gone with the 5" rear.

I'm running 2" wheel spacers with 0 offset maybe that extra half inch will help.
 

lucky RAM

Junior Member
Joined
Oct 21, 2015
Posts
2
Reaction score
1
Ram Year
2014
Engine
Hemi 5.7
HI, if I have a 3.92 gear ratio I can put 37" tires ?? (2014 Ram 1500, 5.7 Hemi)
 

BOWERSFJ

Senior Member
Joined
Apr 29, 2014
Posts
2,713
Reaction score
3,237
Location
Uniontown OH
Ram Year
2012
Engine
5.7L Hemi
Sure ... With the right lift and the right wheel offset/spacers


Sent from my iPhone using Tapatalk
 
Back
Top