I received my harness from @Mpgrimm2 over the weekend along with what I need from @AllMoparParts.com . Doing the install this coming weekend. Mike G has been awesome. He’s also helped me with the install of my OEM bed lights. He is the real deal!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Are you using the round or the horizontal Led lights? i also have a 22 2500 Tradesman and i am having a hard time find parts for it.I received my harness from @Mpgrimm2 over the weekend along with what I need from @AllMoparParts.com . Doing the install this coming weekend. Mike G has been awesome. He’s also helped me with the install of my OEM bed lights. He is the real deal!
Horizontal. Allmoparparts has what you need.Are you using the round or the horizontal Led lights? i also have a 22 2500 Tradesman and i am having a hard time find parts for it.
Replied backHey there, thanks for all of the work. I sent an inquiry about the harnesses.
Glad you're up and running!Finally completed the fog light install on my 2021. The wiring harness, jumper and security bypass worked flawless. Huge props to Mike (Mp grimm2) and koadtech.
On vacation until the end of the month, but I can get you the harnesses you need. You just need to get the dash switch, foglights, brackets, etc.I have 2019 Gen 5 DT Tradesmen that didn’t come with fog lamps… I searched the harnesses on the driver side and found no provision to connect the fog lamps up to… I’ve gone on several Mopar parts sites to see what is available… and drove my local dealership parts guy crazy!!! So online there is a jumper harness and another harness harness that cost like $600… this whole thing is so confusing… I have no idea what parts I’m going to need to make this a plug and play installation… HELP!!!!
My 2020 2500 Tradesman has rear park assist (but not front). I am hoping that Mike's guess is a good one. Is anyone able to tell me what I am looking for, and where?From there, the fog light wires go straight to the BCM, and the park assist wires go straight to the park assist module.
I’m not sure if that connector would always be there to plug the jumper harness into. I would guess that if the truck has the rear park assist feature, it should be there.
Yes it does based on the type of bulbs being used. LED bulbs with Halogen sales code will likely flicker and shut themselves off. H11 connector polarity matters with LEDs as wellDoes it matter which of the two sales code the dealer puts in?