Adding Aux Switches

[DataPak420]

Hey guys I've been reading some thread's about this, I want to add rock lights and a front light bar to my power wagon but I want the oem aux switches. I've already found the part number for the switches its 68376640AE and I found a OEM Aux PDC box kit with the part number 68398184AC. It comes with the blocks to hook up your positive power as well. My understanding is once I remove the trim and swap my trailer brake into the new panel all needed plugs should be behind the dash. But from where do I need to pick up the signal for the relays in the PDC to send power to my lights? Sorry if this doesn't quite make sense electrically I'm not very good with it but I'm working on it as projects pop themselves up.

Sent from my SM-N960W using Tapatalk

 

[leeroy300]

dealer told me the switches are not just plug and play you need something else behind them

 

[Michael Fendley]

Check out this site:

https://www.4thgenramelectronics.com/all-products

 

[WVRam68]

Check out this site:

https://www.4thgenramelectronics.com/all-products

I have their kit. Awesome, and easy if you have an automatic.
Also an FYI, You can also use alfaobd to program the button functions after install.
I would highly recommend it.

 

[mtnrider]

Check out this site:

https://www.4thgenramelectronics.com/all-products

The part numbers he posted are for a 5th gen so I am assuming he now has a new truck (vs his signature). So those kits won't work for him.


.