Aftermarket Headlights Install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Rambo0150

Junior Member
Joined
Dec 10, 2018
Posts
4
Reaction score
0
Location
Canada
Ram Year
2008
Engine
Hemi 5.7
Help needed please.

I have a set of aftermarket headlights for my 08 Ram that have halogen low/high beam headlights, signal/parking lights and some leds. Im trying to figure out how to wire the leds as my daytime running lights instead of the halogens. The headlights have 2 extra wires in the back for the leds that im not sure where to connect to. My problem right now is my halogens flicker when used as daytime. They're clearly not designed to handle a lower voltage but im just not sure how to separate them.
 
OP
OP
Rambo0150

Rambo0150

Junior Member
Joined
Dec 10, 2018
Posts
4
Reaction score
0
Location
Canada
Ram Year
2008
Engine
Hemi 5.7
I have a picture on my phone right now. I can take a better one when I get home. The small red and black are for the leds and the bigger one is the 3 prong plug and play for the halogens.

EE7AE909-CCEF-4E08-8631-40B01E8F75D5.jpeg
 

ramportin1

Sickest member here
Joined
Jun 28, 2017
Posts
3,408
Reaction score
2,221
Location
Oregon
Ram Year
2007
Engine
Hemi 5.7
Positive and negative to your running lights, assuming the LEDs are supposed to be on when the running lights are. You'll have to tap em in

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

CUAviator

Member
Joined
Aug 25, 2017
Posts
62
Reaction score
14
Ram Year
2003
Engine
Hemi
I’ve got an 03. I plan to wire the LED halo/led strips into my fuse box to be used as DRLs.
- Do I need a resistor?
- If so, how do you wire it between the headlight LED wires and the fuse tap? (I’ve only seen the ones that plug into the harness...which I’m not using for the LEDs)?

Thanks!


Sent from my iPad using Tapatalk
 

CUAviator

Member
Joined
Aug 25, 2017
Posts
62
Reaction score
14
Ram Year
2003
Engine
Hemi
Update to ^^^
Against everybody’s better judgement, I installed my new Spyder headlights that my brother got me for the holidays. When I installed them, I hardwired the LED halos and LED dot lights into the accessories for DRL...the truck never had those before. When properly aligned, they put out some good light. And I think they look pretty badass.
66e5beaa3a0a6b99e8648065edfaa693.jpg8879e9ef4b9035257cea3920cfe13bf5.jpg71b943c6a903be1e557c3044f794e524.jpgf5e91434a8d71016ecce30d50e3da73f.jpgbc8704b45d7031c7fc599b58453995d2.jpg
And I put some LEDs in the fogs, reverse, and cargo.


Sent from my iPad using Tapatalk


Sent from my iPad using Tapatalk
 

JoeRam14

Member
Joined
Jan 17, 2019
Posts
70
Reaction score
17
Location
PA
Ram Year
2004
Engine
5.7
I like the look of those lights. Where did your brother get them?
 

JoeRam14

Member
Joined
Jan 17, 2019
Posts
70
Reaction score
17
Location
PA
Ram Year
2004
Engine
5.7
Ok thanks I'll take a look on Amazon and see, I've got a gift card for them laying around somewhere.
 

Latest posts

Forum statistics

Threads
195,597
Posts
2,872,367
Members
156,406
Latest member
1Popeye
Top