AlfaOBD

[itscody]

Updated the tire size a few days ago with alfa (yes i followed complete steps).

And noticed yesterday i have the following message along with this code:
U140E / Service Electric Braking System Code. As well as gas gauge not working

Any insight?

(I cant seem to access my original file on google drive to compare any changes in alfa)

 

[coolhand]

Did you try searching for "air"? I was just doing some programming on my '18, and found that the search is decent, until you put a space in the search term. Then it blanks.

But yeah, there is a "suspension" option for controller target.

Search for Air where?

 

[18CrewDually]

Search for Air where?

Try under Car Configuration Change.

 

[PaleFlyer]

Search for Air where?

Like 18CrewDually said, BCM, Car Config Change. I searched for "suspension", and found it. he found it by searching for "air"

 

[Ramwelder]

Hey guys new to this but I don't know were else to go. I built a welding bed for my RAM 3500 and it was squatting a little low so I went in to change the ride heights and now I'm locked out. Says the air suspension module is in plant mode. I've tried multiple times to clear the DTCs and they will not clear. And I am not able to change any settings. Any help in this department would be greatly appreciated.

 

[18CrewDually]

Hey guys new to this but I don't know were else to go. I built a welding bed for my RAM 3500 and it was squatting a little low so I went in to change the ride heights and now I'm locked out. Says the air suspension module is in plant mode. I've tried multiple times to clear the DTCs and they will not clear. And I am not able to change any settings. Any help in this department would be greatly appreciated.

Print out your original Google Drive saved file of the BCM settings. Compare those to the current to see what's different and change them back to the original setting.

 

[Ramwelder]

I tried to and the file is corrupted tried opening it with multiple readers and still get the same error.

 

[Frank Ram]

Hi I'm experiencing same issue with U1009 and also B16B7. Can't get my horn to work and also left buttons on steering wheel. I believe this happened after I installed turn signals and puddle lights on my aftermarket power folding mirrors using Alfa OBD. If anyone can help it would be greatly appreciated. Thank you

 

[Crowell392]

Sorry if this is beating a dead horse but I'm new to alpa obd and can't find the answer to my question, I have a 2011 Ram and I'm trying to turn on the DRL, and I don't see the cbc section on the alpha odb, can I please get directions on how to make this happen

 

[John Jensen]

Sorry if this is beating a dead horse but I'm new to alpa obd and can't find the answer to my question, I have a 2011 Ram and I'm trying to turn on the DRL, and I don't see the cbc section on the alpha odb, can I please get directions on how to make this happen

Don't know anything about Alpfa and a 2011. Here's how on a 2013 and up. Maybe it will help