Any lifted 5th Gen. Rams?

[2013_BIG-HORN]

2021 Sport.
6'' Enthuze lift.
20" Fuel rims
35x12.50x20 Venom Terra Hunter M/T's

 

[E16herbert]

2020 1500 Bighorn, 6 inch rough country with stock night edition wheels on 37/12.50/20 geolander mts. I had to add a 1/4” spacer on the front wheels to run stock wheels. B2 fabrication exhaust with resonators removed.

 

[tones2SS]

View attachment 465765

BEAUTIFUL!!!
Just a little lower in the rear to level it off and,.............PEFECT!!!

 

[olyelr]

View attachment 4657652020 1500 Bighorn, 6 inch rough country with stock night edition wheels on 37/12.50/20 geolander mts. I had to add a 1/4” spacer on the front wheels to run stock wheels. B2 fabrication exhaust with resonators removed.

Nice! Would love to see more pics from different angles. Im a sucker for lifted trucks with stock wheels.

 

[Rshane]

Carli 3.25 Pintop, fabricated radius arms and torsion sway bar on Nitto Ridge Grappler 37 x 12.50 17’s.

 

[BigBlueBeast]

Here is mine 6 in Zone lift

 

[woodsrider1]

View attachment 473844

 

[DJ Maresco]

here's my 2021 Laramie.

 

[DJ Maresco]

here's my 2021 Laramie.

That was after installing the 35x12.50
Second is with factory wheels with 305x55s

 

[TestPilot57]

5" Rough Country on my 4C Air Susp. Stock wheels with 1/2" spacers and 35 x 12.50 General Grabber ATx.

At OR2 position:

 

[b8ascrub]

I’ve got a 2” fox 2.0 level and 35” grabbers on mine! I think I’m going to add a few more inches after the holidays!

 

[tones2SS]

I’ve got a 2” fox 2.0 level and 35” grabbers on mine! I think I’m going to add a few more inches after the holidays!

That looks great!

 

[TestPilot57]

I’ve got a 2” fox 2.0 level and 35” grabbers on mine! I think I’m going to add a few more inches after the holidays!

Do you have any rubbing? I have rubbing even with 5" and 35s.

 

[TestPilot57]

Do you have any rubbing? I have rubbing even with 5" and 35s.

I should say, that it's only on the passenger side - and you can clearly see that the tire is closer to the back of the opening than the drivers' side, pretty substantially.

 

[Kreuzlaender]

 

[Mbrigh3]

Any leveled non orp 5th gens?

 

[b8ascrub]

Any leveled non orp 5th gens?

My ram is a non ORP, with fox 2.0’s and 35” grabbers!

 

[b8ascrub]

Do you have any rubbing? I have rubbing even with 5" and 35s.

The guy who did my suspension work is a member in here. He took his time with my level kit and did heat up the wheel well in some areas to eliminate rubbing. Amazing work!

But yeah- Fox 2.0 level kit adjusted properly and he got 35” grabbers on 18” installed nicely. We didn’t do anything with the rear yet, that’s after Xmas! But my wife is now hinting that I should add 2” of lift!!

 

[Quick_Shifter]

The guy who did my suspension work is a member in here. He took his time with my level kit and did heat up the wheel well in some areas to eliminate rubbing. Amazing work!

But yeah- Fox 2.0 level kit adjusted properly and he got 35” grabbers on 18” installed nicely. We didn’t do anything with the rear yet, that’s after Xmas! But my wife is now hinting that I should add 2” of lift!!

Smart women

 

[tones2SS]

The guy who did my suspension work is a member in here. He took his time with my level kit and did heat up the wheel well in some areas to eliminate rubbing. Amazing work!

But yeah- Fox 2.0 level kit adjusted properly and he got 35” grabbers on 18” installed nicely. We didn’t do anything with the rear yet, that’s after Xmas! But my wife is now hinting that I should add 2” of lift!!

That looks great!!!