Txhemirt
Senior Member
What size wheel are you running and do you have any rubbing of suspension components?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Buy from Factory Reproductions. You will thank me laterWhy OEwheel Hellcat replicas are no go? I thought to get a set but heard they are no-go?
Im hoping with the spindle drop i wont have any rubbing. But if only at full lock, it wont both me too badI had a set of hellcat reps from whatever distributer discount tire uses. They had multiple issues. Think I’m gonna go mondos route and use factory reproductions wheels. My wheels were rubbing at full lock with 22 inch hellcats though. Curious if anyone else’s were and if so, did you leave them as is or go with spacers? My truck is a 2wd
Check them over really well when you get them. The ones i bought from OE Wheels had dirt specs under the powdercoat on every wheel. Plus the shipping fabric/foam that covers the face left rub marks the whole diameter of the wheel, every wheel. Oh, and the powdercoat seemed to be soft and not cured/mixed correct.I bought a set of these. Should be here shortly. Best price and almost exact copy of factory wheels, Great service too
https://stockwheelsolutions.com/whe...-dodge-ram-dakota-durango-chrysler-20x9-rims/
Check them over really well when you get them. The ones i bought from OE Wheels had dirt specs under the powdercoat on every wheel. Plus the shipping fabric/foam that covers the face left rub marks the whole diameter of the wheel, every wheel. Oh, and the powdercoat seemed to be soft and not cured/mixed correct.
Yes they are going back today. It took awhile to get the correct return slips........I rhen bought from Factory Reproductions and not a single problem.Well thats not reassuring. Thanks for the heads up, i will deff look them over closely. Did you send them back? Were they a hassle?
Yes they are going back today. It took awhile to get the correct return slips........I rhen bought from Factory Reproductions and not a single problem.
Looks sick man. Spoke with factory reproductions. Totally opposite experience I had speaking to a company rep than yours lol. Glad your wheels came out clean. You ran 305 up front as well?Finally put the wheels and tires on. Been driving some today and havent rubbed yet.View attachment 126184 22x10 with 305 45 general grabber uhp. And have the mcgaughys 2/4 spindle drop.
Thanks! 305 in front also. What did they say? Who did you talk to?Looks sick man. Spoke with factory reproductions. Totally opposite experience I had speaking to a company rep than yours lol. Glad your wheels came out clean. You ran 305 up front as well?
Thanks! 305 in front also. What did they say? Who did you talk to?
That sucks. The email guy got back to me during the week. Their ebay personnel returned my messages over the weekendI emailed the contact you provided but never heard anything back from him. Spoke with someone over the phone but didn’t catch his name. No worries though
I'm curious about this as well. I have 24" Hellcat reps with 305 wide tires on my 2wd with factory suspension but was about to get the belltech 2/4 kit. I don't have any rubbing at full lock but would I for some reason start rubbing if I lower it?
What size tire are you running? And are those 24s 9" wide? My 305 45 22 Generals measure 33" according to their website. Its the same height of my stock 20s. I also have the mcgaughys spindle drop on the front which ive read pushes wheel out 3/8" iirc. Not sure if thats the reason i dont rub or not.I'm curious about this as well. I have 24" Hellcat reps with 305 wide tires on my 2wd with factory suspension but was about to get the belltech 2/4 kit. I don't have any rubbing at full lock but would I for some reason start rubbing if I lower it?