Best Mods for under $100 (5th Gen Edition)

[mainard]

Used rocklights for my bed lights, 2 on each side very bright

Sent from my SM-J737T using Tapatalk

 

[SLMinATX]

Installed the 12" screen protector, thanks for that advice @adrianp89, can't tell it's on and so far looks like fingerprints are greatly reduced. No decline in touch sensitivity. Asked my window tint guy to install so I wouldn't mess it up and he did a great job.

https://www.amazon.com/gp/product/B07CM2HXFJ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

 

[LugsLeadOut84]

Not really a mod per say but nice to have with garage parking - thick foam bumpers. This new truck got shoved in the garage so now it is pretty tight... but with these I can open my doors into them and not worry about damage. 4 pack - $24.99 - Amazon

https://www.amazon.com/gp/product/B074KJZBP4/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

You think it would look dumb to encase my whole truck in that foam?

 

[turkeybird56]

Installed/put on AVS II Aeroskin Bug Deflector: Part lists on line at $102.00, but have seen for as low as $89.00

My cost was: $0.00 dollars. I won a small sweepstakes and bought $500.00 of accessories for the "Red Beast"

 

[Gondul]

Aside from that ridge in the center, I like the low profile look of that deflector.

 

[dmalonecentral]

@Accountant

So the link to the cargo lights isn’t working. It’s weird because it shows as an Amazon link but takes me to Walmart. When I pull the part number from the URL and just put that on Amazon is gives me this:

JDM ASTAR Extremely Bright 2000 Lumens 360-Degree Shine 921 912 90-EX Chipsets LED Bulbs For Backup Reverse Lights, Xenon White https://www.amazon.com/dp/B01GGK6QDW/ref=cm_sw_r_cp_api_i_QJseCbS8BW32K

Are those the ones that everyone used for the Cargo Lights?


Sent from my iPhone using Tapatalk

 

[SilverBullet85]

@Accountant

So the link to the cargo lights isn’t working. It’s weird because it shows as an Amazon link but takes me to Walmart. When I pull the part number from the URL and just put that on Amazon is gives me this:

JDM ASTAR Extremely Bright 2000 Lumens 360-Degree Shine 921 912 90-EX Chipsets LED Bulbs For Backup Reverse Lights, Xenon White https://www.amazon.com/dp/B01GGK6QDW/ref=cm_sw_r_cp_api_i_QJseCbS8BW32K

Are those the ones that everyone used for the Cargo Lights?


Sent from my iPhone using Tapatalk

Those are the ones I got. ( I clicked your link to make sure ) Work like a charm.

 

[dmalonecentral]

So that’s weird, even the link I posted takes me to Walmart now. Must be a Tapatalk thing. I will order the Amazon ones. Thanks.


Sent from my iPhone using Tapatalk

 

[Royal27]

Stake pocket covers - great if you have a cover and help keep water from leaking down through the plastic bedlight covers (if you don't have the lights), which I had to silicone in after the bed was sprayed.

Overkill after the silicone fix? Probably. But, made me feel better.

https://www.amazon.com/gp/product/B0026Y3YGK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

 

[Jvander]

I installed the JDM lights mentioned in this thread earlier. Wow! That's a must have, what an improvement!

Has anyone installed these?

Bull Ring 5066 09-18 RAM and 2019 RAM Rear Holes Only- in Black Nickle Finish, Retractable Truck Bed Tie Down Anchor Rail Cap Cut is Required to Install https://www.amazon.com/dp/B07JMDN4C2/ref=cm_sw_r_cp_apa_i_-IchCb07BRRVN

 

[ramrocker]

Posted to wrong thread.

 

[Aggiect01]

Aside from that ridge in the center, I like the low profile look of that deflector.

1)Installed a chrome AVS hood protector. I hope that it doesn't have any problems going through the weekly carwash. Around $90

2) 3W Floorliners front and rear. $160

 

[19Jake]

FREE MOPAR boards!
www.chrysler.ca/en/autoability

 

[turkeybird56]

Aside from that ridge in the center, I like the low profile look of that deflector.

U can barely see it when driving

I stayed with the matte black on the Flame Red, too much chrome already on ride, LOL

 

[mike12193]

Weathertech Mud Flaps

 

[Aggiect01]

1)Installed a chrome AVS hood protector. I hope that it doesn't have any problems going through the weekly carwash. Around $80 walmart.com

2) 3W Floorliners front and rear. $160 amazon

View attachment 156547

View attachment 156548

View attachment 156549

View attachment 156550

*****I DO NOT recommend the AVS hood protector!!! It lasted 2 weeks before starting to peel up in multiple areas. I followed all of the installation instructions exactly and the hood was properly prepped beforehand. The 3M tape looked to be sufficient to hold it but evidently not. I'm trying to return it now.

 

[19Jake]

bar & shackles $50 shipped

 

[19Jake]

3 for $6

 

[19Jake]

$12
noticed a reduction in cabin road noise
push pins attach to 5 existing holes in lower front edge of box
fyi > deleted on builds after mid 2018

 

[GreasyT13]

A little silly, but the 4 holes in the front bumper just looked unfinished in my opinion.

$5.41 fix on amazon, although I found them for $0.45 cents each at ACE after I placed my order

https://smile.amazon.com/gp/product/B005GDFGGY/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1