Bils and leveling spacer

[jboyce81]

Ok guys and gals... I have a 2017 Ram 1500 with Bils set at 2.8 and a TGC 1.5 spacer in the back. Im running 35x12.50 and have a slight rub. I was wondering if I could install a leveling spacer on the front with the bils to get rid of that rub? Is this something that can be done or not with the bils? Any help would be great!

 

[shadowhawk]

you don't need a leveling spacer, you need a wheel spacer. 1/4 will do, or more if you want more tire outside the bodylines.

 

[JimfromAZ]

you don't need a leveling spacer, you need a wheel spacer. 1/4 will do, or more if you want more tire outside the bodylines.

Who sells them? Does mess with right quality with the wheel spacers?

 

[travelinty]

Roughcountry sells a set for our trucks pretty reasonably priced to.


Sent from my iPhone using Tapatalk

 

[shadowhawk]

Bora spacers are mentioned A LOT here n the forum.

 

[GIJoe2010]

Or a body lift

 

[JB1]

Ok guys and gals... I have a 2017 Ram 1500 with Bils set at 2.8 and a TGC 1.5 spacer in the back. Im running 35x12.50 and have a slight rub. I was wondering if I could install a leveling spacer on the front with the bils to get rid of that rub? Is this something that can be done or not with the bils? Any help would be great!

where is it rubbing?...the Upper Control Arm or the fenders/airdam?

 

[613RAMSPORT]

I went with summit racing, got a set of .375 inch, made the 35s fit real nice